HISPANA | Directorio nacional de recursos digitales > Erregistro

Está en:  › Erregistro

Linked Open Data

4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation

Identificadores del recurso

4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970

2637-6105

http://hdl.handle.net/10115/19090

10.1021/acsapm.1c00970

Jatorria

(BURJC-Digital: Repositorio Institucional de la Universidad Rey Juan Carlos)

Fitxa

Izenburu:: 4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation
Tema:: shape memory; 4D printing; additive manufacturing; carbon nanotubes; nanocomposites
Deskribapen:: The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.
Idioma:: English
Autor/Productor:: Cort?s, A.; Aguilar, Jose L.; Cosola, A.; Fern?ndez Sanchez-Romate, Xoan Xos?; Jim?nez-Su?rez, A.; Sangermano, M.; Campo, M.; Prolongo, Silvia G.
Argitaratzaile:: ACS
Eskubideak:: Atribuci?n 4.0 Internacional; http://creativecommons.org/licenses/by/4.0/; info:eu-repo/semantics/openAccess
Data:: 2022-04-21T08:10:53Z; 2021
Tipo de recurso:: info:eu-repo/semantics/article

oai_dc

<?xml version="1.0" encoding="UTF-8" ?>

<oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
1. <dc:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dc:title>
2. <dc:creator>Cort?s, A.</dc:creator>
3. <dc:creator>Aguilar, Jose L.</dc:creator>
4. <dc:creator>Cosola, A.</dc:creator>
5. <dc:creator>Fern?ndez Sanchez-Romate, Xoan Xos?</dc:creator>
6. <dc:creator>Jim?nez-Su?rez, A.</dc:creator>
7. <dc:creator>Sangermano, M.</dc:creator>
8. <dc:creator>Campo, M.</dc:creator>
9. <dc:creator>Prolongo, Silvia G.</dc:creator>
10. <dc:subject>shape memory</dc:subject>
11. <dc:subject>4D printing</dc:subject>
12. <dc:subject>additive manufacturing</dc:subject>
13. <dc:subject>carbon nanotubes</dc:subject>
14. <dc:subject>nanocomposites</dc:subject>
15. <dc:description>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dc:description>
16. <dc:date>2022-04-21T08:10:53Z</dc:date>
17. <dc:date>2022-04-21T08:10:53Z</dc:date>
18. <dc:date>2021</dc:date>
19. <dc:type>info:eu-repo/semantics/article</dc:type>
20. <dc:identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dc:identifier>
21. <dc:identifier>2637-6105</dc:identifier>
22. <dc:identifier>http://hdl.handle.net/10115/19090</dc:identifier>
23. <dc:identifier>10.1021/acsapm.1c00970</dc:identifier>
24. <dc:language>eng</dc:language>
25. <dc:rights>Atribuci?n 4.0 Internacional</dc:rights>
26. <dc:rights>http://creativecommons.org/licenses/by/4.0/</dc:rights>
27. <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
28. <dc:publisher>ACS</dc:publisher>
</oai_dc:dc>

didl

<?xml version="1.0" encoding="UTF-8" ?>

<d:DIDL schemaLocation="urn:mpeg:mpeg21:2002:02-DIDL-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/did/didl.xsd">
1. <d:DIDLInfo>
  1. <dcterms:created schemaLocation="http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/dcterms.xsd">2022-04-21T08:10:53Z</dcterms:created>
  </d:DIDLInfo>
2. <d:Item id="hdl_10115_19090">
  1. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <dii:Identifier schemaLocation="urn:mpeg:mpeg21:2002:01-DII-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/dii/dii.xsd">urn:hdl:10115/19090</dii:Identifier>
      </d:Statement>
    </d:Descriptor>
  2. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dc:title>
        <dc:creator>Cort?s, A.</dc:creator>
        <dc:creator>Aguilar, Jose L.</dc:creator>
        <dc:creator>Cosola, A.</dc:creator>
        <dc:creator>Fern?ndez Sanchez-Romate, Xoan Xos?</dc:creator>
        <dc:creator>Jim?nez-Su?rez, A.</dc:creator>
        <dc:creator>Sangermano, M.</dc:creator>
        <dc:creator>Campo, M.</dc:creator>
        <dc:creator>Prolongo, Silvia G.</dc:creator>
        <dc:subject>shape memory</dc:subject>
        <dc:subject>4D printing</dc:subject>
        <dc:subject>additive manufacturing</dc:subject>
        <dc:subject>carbon nanotubes</dc:subject>
        <dc:subject>nanocomposites</dc:subject>
        <dc:description>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dc:description>
        <dc:date>2022-04-21T08:10:53Z</dc:date>
        <dc:date>2022-04-21T08:10:53Z</dc:date>
        <dc:date>2021</dc:date>
        <dc:type>info:eu-repo/semantics/article</dc:type>
        <dc:identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dc:identifier>
        <dc:identifier>2637-6105</dc:identifier>
        <dc:identifier>http://hdl.handle.net/10115/19090</dc:identifier>
        <dc:identifier>10.1021/acsapm.1c00970</dc:identifier>
        <dc:language>eng</dc:language>
        <dc:rights>http://creativecommons.org/licenses/by/4.0/</dc:rights>
        <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
        <dc:rights>Atribuci?n 4.0 Internacional</dc:rights>
        <dc:publisher>ACS</dc:publisher>
        </oai_dc:dc>
      </d:Statement>
    </d:Descriptor>
  3. <d:Component id="10115_19090_1">
    1. <d:Resource mimeType="application/pdf" ref="https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf" />
    </d:Component>
  </d:Item>
</d:DIDL>

dim

<?xml version="1.0" encoding="UTF-8" ?>

<dim:dim schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.arvo.es/dim.xsd">
1. <dim:field element="contributor" mdschema="dc" qualifier="author">Cort?s, A.</dim:field>
2. <dim:field element="contributor" mdschema="dc" qualifier="author">Aguilar, Jose L.</dim:field>
3. <dim:field element="contributor" mdschema="dc" qualifier="author">Cosola, A.</dim:field>
4. <dim:field element="contributor" mdschema="dc" qualifier="author">Fern?ndez Sanchez-Romate, Xoan Xos?</dim:field>
5. <dim:field element="contributor" mdschema="dc" qualifier="author">Jim?nez-Su?rez, A.</dim:field>
6. <dim:field element="contributor" mdschema="dc" qualifier="author">Sangermano, M.</dim:field>
7. <dim:field element="contributor" mdschema="dc" qualifier="author">Campo, M.</dim:field>
8. <dim:field element="contributor" mdschema="dc" qualifier="author">Prolongo, Silvia G.</dim:field>
9. <dim:field element="date" mdschema="dc" qualifier="accessioned">2022-04-21T08:10:53Z</dim:field>
10. <dim:field element="date" mdschema="dc" qualifier="available">2022-04-21T08:10:53Z</dim:field>
11. <dim:field element="date" mdschema="dc" qualifier="issued">2021</dim:field>
12. <dim:field element="identifier" lang="es" mdschema="dc" qualifier="citation">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dim:field>
13. <dim:field element="identifier" mdschema="dc" qualifier="issn">2637-6105</dim:field>
14. <dim:field element="identifier" mdschema="dc" qualifier="uri">http://hdl.handle.net/10115/19090</dim:field>
15. <dim:field element="identifier" lang="es" mdschema="dc" qualifier="doi">10.1021/acsapm.1c00970</dim:field>
16. <dim:field element="description" lang="es" mdschema="dc" qualifier="abstract">The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dim:field>
17. <dim:field element="language" lang="es" mdschema="dc" qualifier="iso">eng</dim:field>
18. <dim:field element="publisher" lang="es" mdschema="dc">ACS</dim:field>
19. <dim:field element="rights" lang="*" mdschema="dc">Atribuci?n 4.0 Internacional</dim:field>
20. <dim:field element="rights" lang="*" mdschema="dc" qualifier="uri">http://creativecommons.org/licenses/by/4.0/</dim:field>
21. <dim:field element="rights" lang="es" mdschema="dc" qualifier="accessRights">info:eu-repo/semantics/openAccess</dim:field>
22. <dim:field element="subject" lang="es" mdschema="dc">shape memory</dim:field>
23. <dim:field element="subject" lang="es" mdschema="dc">4D printing</dim:field>
24. <dim:field element="subject" lang="es" mdschema="dc">additive manufacturing</dim:field>
25. <dim:field element="subject" lang="es" mdschema="dc">carbon nanotubes</dim:field>
26. <dim:field element="subject" lang="es" mdschema="dc">nanocomposites</dim:field>
27. <dim:field element="title" lang="es" mdschema="dc">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dim:field>
28. <dim:field element="type" lang="es" mdschema="dc">info:eu-repo/semantics/article</dim:field>
</dim:dim>

ese

<?xml version="1.0" encoding="UTF-8" ?>

<europeana:record schemaLocation="http://www.europeana.eu/schemas/ese/ http://www.europeana.eu/schemas/ese/ESE-V3.4.xsd">
1. <dc:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dc:title>
2. <dc:creator>Cort?s, A.</dc:creator>
3. <dc:creator>Aguilar, Jose L.</dc:creator>
4. <dc:creator>Cosola, A.</dc:creator>
5. <dc:creator>Fern?ndez Sanchez-Romate, Xoan Xos?</dc:creator>
6. <dc:creator>Jim?nez-Su?rez, A.</dc:creator>
7. <dc:creator>Sangermano, M.</dc:creator>
8. <dc:creator>Campo, M.</dc:creator>
9. <dc:creator>Prolongo, Silvia G.</dc:creator>
10. <dc:subject>shape memory</dc:subject>
11. <dc:subject>4D printing</dc:subject>
12. <dc:subject>additive manufacturing</dc:subject>
13. <dc:subject>carbon nanotubes</dc:subject>
14. <dc:subject>nanocomposites</dc:subject>
15. <dc:description>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dc:description>
16. <dc:date>2022-04-21T08:10:53Z</dc:date>
17. <dc:date>2022-04-21T08:10:53Z</dc:date>
18. <dc:date>2021</dc:date>
19. <dc:type>info:eu-repo/semantics/article</dc:type>
20. <dc:identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dc:identifier>
21. <dc:identifier>2637-6105</dc:identifier>
22. <dc:identifier>http://hdl.handle.net/10115/19090</dc:identifier>
23. <dc:identifier>10.1021/acsapm.1c00970</dc:identifier>
24. <dc:language>eng</dc:language>
25. <dc:rights>Atribuci?n 4.0 Internacional</dc:rights>
26. <dc:rights>http://creativecommons.org/licenses/by/4.0/</dc:rights>
27. <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
28. <dc:publisher>ACS</dc:publisher>
29. <europeana:object>https://eciencia.urjc.es/bitstream/10115/19090/4/acsapm.1c00970.pdf.jpg</europeana:object>
30. <europeana:provider>Hispana</europeana:provider>
31. <europeana:type>TEXT</europeana:type>
32. <europeana:rights>http://creativecommons.org/licenses/by/4.0/</europeana:rights>
33. <europeana:dataProvider>Universidad Camilo Jos?? Cela</europeana:dataProvider>
34. <europeana:isShownAt>http://hdl.handle.net/10115/19090</europeana:isShownAt>
</europeana:record>

etdms

<?xml version="1.0" encoding="UTF-8" ?>

<thesis schemaLocation="http://www.ndltd.org/standards/metadata/etdms/1.0/ http://www.ndltd.org/standards/metadata/etdms/1.0/etdms.xsd">
1. <title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</title>
2. <creator>Cort?s, A.</creator>
3. <creator>Aguilar, Jose L.</creator>
4. <creator>Cosola, A.</creator>
5. <creator>Fern?ndez Sanchez-Romate, Xoan Xos?</creator>
6. <creator>Jim?nez-Su?rez, A.</creator>
7. <creator>Sangermano, M.</creator>
8. <creator>Campo, M.</creator>
9. <creator>Prolongo, Silvia G.</creator>
10. <subject>shape memory</subject>
11. <subject>4D printing</subject>
12. <subject>additive manufacturing</subject>
13. <subject>carbon nanotubes</subject>
14. <subject>nanocomposites</subject>
15. <description>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</description>
16. <date>2022-04-21</date>
17. <date>2022-04-21</date>
18. <date>2021</date>
19. <type>info:eu-repo/semantics/article</type>
20. <identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</identifier>
21. <identifier>2637-6105</identifier>
22. <identifier>http://hdl.handle.net/10115/19090</identifier>
23. <identifier>10.1021/acsapm.1c00970</identifier>
24. <language>eng</language>
25. <rights>http://creativecommons.org/licenses/by/4.0/</rights>
26. <rights>info:eu-repo/semantics/openAccess</rights>
27. <rights>Atribuci?n 4.0 Internacional</rights>
28. <publisher>ACS</publisher>
</thesis>

marc

<?xml version="1.0" encoding="UTF-8" ?>

<record schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd">
1. <leader>00925njm 22002777a 4500</leader>
2. <datafield ind1=" " ind2=" " tag="042">
  1. <subfield code="a">dc</subfield>
  </datafield>
3. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Cort?s, A.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
4. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Aguilar, Jose L.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
5. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Cosola, A.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
6. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Fern?ndez Sanchez-Romate, Xoan Xos?</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
7. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Jim?nez-Su?rez, A.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
8. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Sangermano, M.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
9. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Campo, M.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
10. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Prolongo, Silvia G.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
11. <datafield ind1=" " ind2=" " tag="260">
  1. <subfield code="c">2021</subfield>
  </datafield>
12. <datafield ind1=" " ind2=" " tag="520">
  1. <subfield code="a">The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</subfield>
  </datafield>
13. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</subfield>
  </datafield>
14. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">2637-6105</subfield>
  </datafield>
15. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">http://hdl.handle.net/10115/19090</subfield>
  </datafield>
16. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">10.1021/acsapm.1c00970</subfield>
  </datafield>
17. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">shape memory</subfield>
  </datafield>
18. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">4D printing</subfield>
  </datafield>
19. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">additive manufacturing</subfield>
  </datafield>
20. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">carbon nanotubes</subfield>
  </datafield>
21. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">nanocomposites</subfield>
  </datafield>
22. <datafield ind1="0" ind2="0" tag="245">
  1. <subfield code="a">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</subfield>
  </datafield>
</record>

mets

<?xml version="1.0" encoding="UTF-8" ?>

<mets ID=" DSpace_ITEM_10115-19090" OBJID=" hdl:10115/19090" PROFILE="DSpace METS SIP Profile 1.0" TYPE="DSpace ITEM" schemaLocation="http://www.loc.gov/METS/ http://www.loc.gov/standards/mets/mets.xsd">
1. <metsHdr CREATEDATE="2022-10-25T06:38:34Z">
  1. <agent ROLE="CUSTODIAN" TYPE="ORGANIZATION">
    1. <name>Archivo Abierto Institucional de la Universidad Rey Juan Carlos</name>
    </agent>
  </metsHdr>
2. <dmdSec ID="DMD_10115_19090">
  1. <mdWrap MDTYPE="MODS">
    1. <xmlData schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
      1. <mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Cort?s, A.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Aguilar, Jose L.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Cosola, A.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Fern?ndez Sanchez-Romate, Xoan Xos?</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Jim?nez-Su?rez, A.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Sangermano, M.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Campo, M.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Prolongo, Silvia G.</mods:namePart>
        </mods:name>
        <mods:extension>
        <mods:dateAccessioned encoding="iso8601">2022-04-21T08:10:53Z</mods:dateAccessioned>
        </mods:extension>
        <mods:extension>
        <mods:dateAvailable encoding="iso8601">2022-04-21T08:10:53Z</mods:dateAvailable>
        </mods:extension>
        <mods:originInfo>
        <mods:dateIssued encoding="iso8601">2021</mods:dateIssued>
        </mods:originInfo>
        <mods:identifier type="citation">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</mods:identifier>
        <mods:identifier type="issn">2637-6105</mods:identifier>
        <mods:identifier type="uri">http://hdl.handle.net/10115/19090</mods:identifier>
        <mods:identifier type="doi">10.1021/acsapm.1c00970</mods:identifier>
        <mods:abstract>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</mods:abstract>
        <mods:language>
        <mods:languageTerm authority="rfc3066">eng</mods:languageTerm>
        </mods:language>
        <mods:accessCondition type="useAndReproduction">Atribuci?n 4.0 Internacional</mods:accessCondition>
        <mods:subject>
        <mods:topic>shape memory</mods:topic>
        </mods:subject>
        <mods:subject>
        <mods:topic>4D printing</mods:topic>
        </mods:subject>
        <mods:subject>
        <mods:topic>additive manufacturing</mods:topic>
        </mods:subject>
        <mods:subject>
        <mods:topic>carbon nanotubes</mods:topic>
        </mods:subject>
        <mods:subject>
        <mods:topic>nanocomposites</mods:topic>
        </mods:subject>
        <mods:titleInfo>
        <mods:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</mods:title>
        </mods:titleInfo>
        <mods:genre>info:eu-repo/semantics/article</mods:genre>
        </mods:mods>
      </xmlData>
    </mdWrap>
  </dmdSec>
3. <amdSec ID="FO_10115_19090_1">
  1. <techMD ID="TECH_O_10115_19090_1">
    1. <mdWrap MDTYPE="PREMIS">
      1. <xmlData schemaLocation="http://www.loc.gov/standards/premis http://www.loc.gov/standards/premis/PREMIS-v1-0.xsd">
        <premis:premis>
        <premis:object>
        <premis:objectIdentifier>
        <premis:objectIdentifierType>URL</premis:objectIdentifierType>
        <premis:objectIdentifierValue>https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf</premis:objectIdentifierValue>
        </premis:objectIdentifier>
        <premis:objectCategory>File</premis:objectCategory>
        <premis:objectCharacteristics>
        <premis:fixity>
        <premis:messageDigestAlgorithm>MD5</premis:messageDigestAlgorithm>
        <premis:messageDigest>b8d72fd404e4658acbe77a2218b79c9d</premis:messageDigest>
        </premis:fixity>
        <premis:size>3859494</premis:size>
        <premis:format>
        <premis:formatDesignation>
        <premis:formatName>application/pdf</premis:formatName>
        </premis:formatDesignation>
        </premis:format>
        </premis:objectCharacteristics>
        <premis:originalName>acsapm.1c00970.pdf</premis:originalName>
        </premis:object>
        </premis:premis>
        </xmlData>
      </mdWrap>
    </techMD>
  </amdSec>
4. <amdSec ID="FT_10115_19090_3">
  1. <techMD ID="TECH_T_10115_19090_3">
    1. <mdWrap MDTYPE="PREMIS">
      1. <xmlData schemaLocation="http://www.loc.gov/standards/premis http://www.loc.gov/standards/premis/PREMIS-v1-0.xsd">
        <premis:premis>
        <premis:object>
        <premis:objectIdentifier>
        <premis:objectIdentifierType>URL</premis:objectIdentifierType>
        <premis:objectIdentifierValue>https://eciencia.urjc.es/bitstream/10115/19090/3/acsapm.1c00970.pdf.txt</premis:objectIdentifierValue>
        </premis:objectIdentifier>
        <premis:objectCategory>File</premis:objectCategory>
        <premis:objectCharacteristics>
        <premis:fixity>
        <premis:messageDigestAlgorithm>MD5</premis:messageDigestAlgorithm>
        <premis:messageDigest>dd5630cf1f3ab97826b9289123d541ea</premis:messageDigest>
        </premis:fixity>
        <premis:size>43329</premis:size>
        <premis:format>
        <premis:formatDesignation>
        <premis:formatName>text/plain</premis:formatName>
        </premis:formatDesignation>
        </premis:format>
        </premis:objectCharacteristics>
        <premis:originalName>acsapm.1c00970.pdf.txt</premis:originalName>
        </premis:object>
        </premis:premis>
        </xmlData>
      </mdWrap>
    </techMD>
  </amdSec>
5. <fileSec>
  1. <fileGrp USE="ORIGINAL">
    1. <file ADMID="FO_10115_19090_1" CHECKSUM="b8d72fd404e4658acbe77a2218b79c9d" CHECKSUMTYPE="MD5" GROUPID="GROUP_BITSTREAM_10115_19090_1" ID="BITSTREAM_ORIGINAL_10115_19090_1" MIMETYPE="application/pdf" SEQ="1" SIZE="3859494">
      1. <FLocat LOCTYPE="URL" href="https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf" type="simple" />
      </file>
    </fileGrp>
  2. <fileGrp USE="TEXT">
    1. <file ADMID="FT_10115_19090_3" CHECKSUM="dd5630cf1f3ab97826b9289123d541ea" CHECKSUMTYPE="MD5" GROUPID="GROUP_BITSTREAM_10115_19090_3" ID="BITSTREAM_TEXT_10115_19090_3" MIMETYPE="text/plain" SEQ="3" SIZE="43329">
      1. <FLocat LOCTYPE="URL" href="https://eciencia.urjc.es/bitstream/10115/19090/3/acsapm.1c00970.pdf.txt" type="simple" />
      </file>
    </fileGrp>
  </fileSec>
6. <structMap LABEL="DSpace Object" TYPE="LOGICAL">
  1. <div ADMID="DMD_10115_19090" TYPE="DSpace Object Contents">
    1. <div TYPE="DSpace BITSTREAM">
      1. <fptr FILEID="BITSTREAM_ORIGINAL_10115_19090_1" />
      </div>
    </div>
  </structMap>
</mets>

mods

<?xml version="1.0" encoding="UTF-8" ?>

<mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
1. <mods:name>
  1. <mods:namePart>Cort?s, A.</mods:namePart>
  </mods:name>
2. <mods:name>
  1. <mods:namePart>Aguilar, Jose L.</mods:namePart>
  </mods:name>
3. <mods:name>
  1. <mods:namePart>Cosola, A.</mods:namePart>
  </mods:name>
4. <mods:name>
  1. <mods:namePart>Fern?ndez Sanchez-Romate, Xoan Xos?</mods:namePart>
  </mods:name>
5. <mods:name>
  1. <mods:namePart>Jim?nez-Su?rez, A.</mods:namePart>
  </mods:name>
6. <mods:name>
  1. <mods:namePart>Sangermano, M.</mods:namePart>
  </mods:name>
7. <mods:name>
  1. <mods:namePart>Campo, M.</mods:namePart>
  </mods:name>
8. <mods:name>
  1. <mods:namePart>Prolongo, Silvia G.</mods:namePart>
  </mods:name>
9. <mods:extension>
  1. <mods:dateAvailable encoding="iso8601">2022-04-21T08:10:53Z</mods:dateAvailable>
  </mods:extension>
10. <mods:extension>
  1. <mods:dateAccessioned encoding="iso8601">2022-04-21T08:10:53Z</mods:dateAccessioned>
  </mods:extension>
11. <mods:originInfo>
  1. <mods:dateIssued encoding="iso8601">2021</mods:dateIssued>
  </mods:originInfo>
12. <mods:identifier type="citation">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</mods:identifier>
13. <mods:identifier type="issn">2637-6105</mods:identifier>
14. <mods:identifier type="uri">http://hdl.handle.net/10115/19090</mods:identifier>
15. <mods:identifier type="doi">10.1021/acsapm.1c00970</mods:identifier>
16. <mods:abstract>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</mods:abstract>
17. <mods:language>
  1. <mods:languageTerm>eng</mods:languageTerm>
  </mods:language>
18. <mods:accessCondition type="useAndReproduction">http://creativecommons.org/licenses/by/4.0/</mods:accessCondition>
19. <mods:accessCondition type="useAndReproduction">info:eu-repo/semantics/openAccess</mods:accessCondition>
20. <mods:accessCondition type="useAndReproduction">Atribuci?n 4.0 Internacional</mods:accessCondition>
21. <mods:subject>
  1. <mods:topic>shape memory</mods:topic>
  </mods:subject>
22. <mods:subject>
  1. <mods:topic>4D printing</mods:topic>
  </mods:subject>
23. <mods:subject>
  1. <mods:topic>additive manufacturing</mods:topic>
  </mods:subject>
24. <mods:subject>
  1. <mods:topic>carbon nanotubes</mods:topic>
  </mods:subject>
25. <mods:subject>
  1. <mods:topic>nanocomposites</mods:topic>
  </mods:subject>
26. <mods:titleInfo>
  1. <mods:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</mods:title>
  </mods:titleInfo>
27. <mods:genre>info:eu-repo/semantics/article</mods:genre>
</mods:mods>

ore

<?xml version="1.0" encoding="UTF-8" ?>

<atom:entry schemaLocation="http://www.w3.org/2005/Atom http://www.kbcafe.com/rss/atom.xsd.xml">
1. <atom:id>http://hdl.handle.net/10115/19090/ore.xml</atom:id>
2. <atom:link href="http://hdl.handle.net/10115/19090" rel="alternate" />
3. <atom:link href="http://hdl.handle.net/10115/19090/ore.xml" rel="http://www.openarchives.org/ore/terms/describes" />
4. <atom:link href="http://hdl.handle.net/10115/19090/ore.xml#atom" rel="self" type="application/atom+xml" />
5. <atom:published>2022-04-21T08:10:53Z</atom:published>
6. <atom:updated>2022-04-21T08:10:53Z</atom:updated>
7. <atom:source>
  1. <atom:generator>Archivo Abierto Institucional de la Universidad Rey Juan Carlos</atom:generator>
  </atom:source>
8. <atom:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</atom:title>
9. <atom:author>
  1. <atom:name>Cort?s, A.</atom:name>
  </atom:author>
10. <atom:author>
  1. <atom:name>Aguilar, Jose L.</atom:name>
  </atom:author>
11. <atom:author>
  1. <atom:name>Cosola, A.</atom:name>
  </atom:author>
12. <atom:author>
  1. <atom:name>Fern?ndez Sanchez-Romate, Xoan Xos?</atom:name>
  </atom:author>
13. <atom:author>
  1. <atom:name>Jim?nez-Su?rez, A.</atom:name>
  </atom:author>
14. <atom:author>
  1. <atom:name>Sangermano, M.</atom:name>
  </atom:author>
15. <atom:author>
  1. <atom:name>Campo, M.</atom:name>
  </atom:author>
16. <atom:author>
  1. <atom:name>Prolongo, Silvia G.</atom:name>
  </atom:author>
17. <atom:category label="Aggregation" scheme="http://www.openarchives.org/ore/terms/" term="http://www.openarchives.org/ore/terms/Aggregation" />
18. <atom:category scheme="http://www.openarchives.org/ore/atom/modified" term="2022-04-21T08:10:53Z" />
19. <atom:category label="DSpace Item" scheme="http://www.dspace.org/objectModel/" term="DSpaceItem" />
20. <atom:link href="https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf" length="3859494" rel="http://www.openarchives.org/ore/terms/aggregates" title="acsapm.1c00970.pdf" type="application/pdf" />
21. <oreatom:triples>
  1. <rdf:Description about="http://hdl.handle.net/10115/19090/ore.xml#atom">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceItem" />
    2. <dcterms:modified>2022-04-21T08:10:53Z</dcterms:modified>
    </rdf:Description>
  2. <rdf:Description about="https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>ORIGINAL</dcterms:description>
    </rdf:Description>
  3. <rdf:Description about="https://eciencia.urjc.es/bitstream/10115/19090/2/license_rdf">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>CC-LICENSE</dcterms:description>
    </rdf:Description>
  4. <rdf:Description about="https://eciencia.urjc.es/bitstream/10115/19090/3/acsapm.1c00970.pdf.txt">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>TEXT</dcterms:description>
    </rdf:Description>
  5. <rdf:Description about="https://eciencia.urjc.es/bitstream/10115/19090/4/acsapm.1c00970.pdf.jpg">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>THUMBNAIL</dcterms:description>
    </rdf:Description>
  </oreatom:triples>
</atom:entry>

qdc

<?xml version="1.0" encoding="UTF-8" ?>

<qdc:qualifieddc schemaLocation="http://purl.org/dc/elements/1.1/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dc.xsd http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dcterms.xsd http://dspace.org/qualifieddc/ http://www.ukoln.ac.uk/metadata/dcmi/xmlschema/qualifieddc.xsd">
1. <dc:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dc:title>
2. <dc:creator>Cort?s, A.</dc:creator>
3. <dc:creator>Aguilar, Jose L.</dc:creator>
4. <dc:creator>Cosola, A.</dc:creator>
5. <dc:creator>Fern?ndez Sanchez-Romate, Xoan Xos?</dc:creator>
6. <dc:creator>Jim?nez-Su?rez, A.</dc:creator>
7. <dc:creator>Sangermano, M.</dc:creator>
8. <dc:creator>Campo, M.</dc:creator>
9. <dc:creator>Prolongo, Silvia G.</dc:creator>
10. <dc:subject>shape memory</dc:subject>
11. <dc:subject>4D printing</dc:subject>
12. <dc:subject>additive manufacturing</dc:subject>
13. <dc:subject>carbon nanotubes</dc:subject>
14. <dc:subject>nanocomposites</dc:subject>
15. <dcterms:abstract>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dcterms:abstract>
16. <dcterms:dateAccepted>2022-04-21T08:10:53Z</dcterms:dateAccepted>
17. <dcterms:available>2022-04-21T08:10:53Z</dcterms:available>
18. <dcterms:created>2022-04-21T08:10:53Z</dcterms:created>
19. <dcterms:issued>2021</dcterms:issued>
20. <dc:type>info:eu-repo/semantics/article</dc:type>
21. <dc:identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dc:identifier>
22. <dc:identifier>2637-6105</dc:identifier>
23. <dc:identifier>http://hdl.handle.net/10115/19090</dc:identifier>
24. <dc:identifier>10.1021/acsapm.1c00970</dc:identifier>
25. <dc:language>eng</dc:language>
26. <dc:rights>http://creativecommons.org/licenses/by/4.0/</dc:rights>
27. <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
28. <dc:rights>Atribuci?n 4.0 Internacional</dc:rights>
29. <dc:publisher>ACS</dc:publisher>
</qdc:qualifieddc>

rdf

<?xml version="1.0" encoding="UTF-8" ?>

<rdf:RDF schemaLocation="http://www.openarchives.org/OAI/2.0/rdf/ http://www.openarchives.org/OAI/2.0/rdf.xsd">
1. <ow:Publication about="oai:eciencia.urjc.es:10115/19090">
  1. <dc:title>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</dc:title>
  2. <dc:creator>Cort?s, A.</dc:creator>
  3. <dc:creator>Aguilar, Jose L.</dc:creator>
  4. <dc:creator>Cosola, A.</dc:creator>
  5. <dc:creator>Fern?ndez Sanchez-Romate, Xoan Xos?</dc:creator>
  6. <dc:creator>Jim?nez-Su?rez, A.</dc:creator>
  7. <dc:creator>Sangermano, M.</dc:creator>
  8. <dc:creator>Campo, M.</dc:creator>
  9. <dc:creator>Prolongo, Silvia G.</dc:creator>
  10. <dc:subject>shape memory</dc:subject>
  11. <dc:subject>4D printing</dc:subject>
  12. <dc:subject>additive manufacturing</dc:subject>
  13. <dc:subject>carbon nanotubes</dc:subject>
  14. <dc:subject>nanocomposites</dc:subject>
  15. <dc:description>The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</dc:description>
  16. <dc:date>2022-04-21T08:10:53Z</dc:date>
  17. <dc:date>2022-04-21T08:10:53Z</dc:date>
  18. <dc:date>2021</dc:date>
  19. <dc:type>info:eu-repo/semantics/article</dc:type>
  20. <dc:identifier>4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</dc:identifier>
  21. <dc:identifier>2637-6105</dc:identifier>
  22. <dc:identifier>http://hdl.handle.net/10115/19090</dc:identifier>
  23. <dc:identifier>10.1021/acsapm.1c00970</dc:identifier>
  24. <dc:language>eng</dc:language>
  25. <dc:rights>http://creativecommons.org/licenses/by/4.0/</dc:rights>
  26. <dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
  27. <dc:rights>Atribuci?n 4.0 Internacional</dc:rights>
  28. <dc:publisher>ACS</dc:publisher>
  </ow:Publication>
</rdf:RDF>

xoai

<?xml version="1.0" encoding="UTF-8" ?>

<metadata schemaLocation="http://www.lyncode.com/xoai http://www.lyncode.com/xsd/xoai.xsd">
1. <element name="dc">
  1. <element name="contributor">
    1. <element name="author">
      1. <element name="none">
        <field name="value">Cort?s, A.</field>
        <field name="value">Aguilar, Jose L.</field>
        <field name="value">Cosola, A.</field>
        <field name="value">Fern?ndez Sanchez-Romate, Xoan Xos?</field>
        <field name="value">Jim?nez-Su?rez, A.</field>
        <field name="value">Sangermano, M.</field>
        <field name="value">Campo, M.</field>
        <field name="value">Prolongo, Silvia G.</field>
        </element>
      </element>
    </element>
  2. <element name="date">
    1. <element name="accessioned">
      1. <element name="none">
        <field name="value">2022-04-21T08:10:53Z</field>
        </element>
      </element>
    2. <element name="available">
      1. <element name="none">
        <field name="value">2022-04-21T08:10:53Z</field>
        </element>
      </element>
    3. <element name="issued">
      1. <element name="none">
        <field name="value">2021</field>
        </element>
      </element>
    </element>
  3. <element name="identifier">
    1. <element name="citation">
      1. <element name="es">
        <field name="value">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR Radiation A. Cort?s, Jose L. Aguilar, A. Cosola, Xoan Xos? Fern?ndez Sanchez-Romate, A. Jim?nez-Su?rez, M. Sangermano, M. Campo, and Silvia G. Prolongo ACS Applied Polymer Materials 2021 3 (10), 5207-5215 DOI: 10.1021/acsapm.1c00970</field>
        </element>
      </element>
    2. <element name="issn">
      1. <element name="none">
        <field name="value">2637-6105</field>
        </element>
      </element>
    3. <element name="uri">
      1. <element name="none">
        <field name="value">http://hdl.handle.net/10115/19090</field>
        </element>
      </element>
    4. <element name="doi">
      1. <element name="es">
        <field name="value">10.1021/acsapm.1c00970</field>
        </element>
      </element>
    </element>
  4. <element name="description">
    1. <element name="abstract">
      1. <element name="es">
        <field name="value">The shape memory (SM) capabilities of nanocomposites based on two photocurable acrylated/methacrylated resins, doped with carbon nanotubes (CNTs), and manufactured by digital light processing 3D printing were investigated. The mechanical properties and glass transition temperature (Tg) can be tailored in a broad range by varying the weight ratio of the two resins (Tg ranging from 15 to 190 ?C; Young?s modulus from 1.5 to 2500 MPa). Shape fixity (SF) and recovery (SR) ratios are strongly influenced by the temperature being significantly higher at temperatures close to the Tg. The results confirm that the SF strongly depends on the stiffness of chain segments between cross-linking points, whereas the SR mainly depends on the cross-link density of the network. CNT addition barely affects the SF and SR in the conventional oven, whereas the recovery speed using IR heating is significantly increased for the doped nanocomposites due to their higher IR absorbance.</field>
        </element>
      </element>
    </element>
  5. <element name="language">
    1. <element name="iso">
      1. <element name="es">
        <field name="value">eng</field>
        </element>
      </element>
    </element>
  6. <element name="publisher">
    1. <element name="es">
      1. <field name="value">ACS</field>
      </element>
    </element>
  7. <element name="rights">
    1. <element name="*">
      1. <field name="value">Atribuci?n 4.0 Internacional</field>
      </element>
    2. <element name="uri">
      1. <element name="*">
        <field name="value">http://creativecommons.org/licenses/by/4.0/</field>
        </element>
      </element>
    3. <element name="accessRights">
      1. <element name="es">
        <field name="value">info:eu-repo/semantics/openAccess</field>
        </element>
      </element>
    </element>
  8. <element name="subject">
    1. <element name="es">
      1. <field name="value">shape memory</field>
      2. <field name="value">4D printing</field>
      3. <field name="value">additive manufacturing</field>
      4. <field name="value">carbon nanotubes</field>
      5. <field name="value">nanocomposites</field>
      </element>
    </element>
  9. <element name="title">
    1. <element name="es">
      1. <field name="value">4D-Printed Resins and Nanocomposites Thermally Stimulated by Conventional Heating and IR-Radiation</field>
      </element>
    </element>
  10. <element name="type">
    1. <element name="es">
      1. <field name="value">info:eu-repo/semantics/article</field>
      </element>
    </element>
  </element>
2. <element name="bundles">
  1. <element name="bundle">
    1. <field name="name">ORIGINAL</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">acsapm.1c00970.pdf</field>
        <field name="originalName">acsapm.1c00970.pdf</field>
        <field name="format">application/pdf</field>
        <field name="size">3859494</field>
        <field name="url">https://eciencia.urjc.es/bitstream/10115/19090/1/acsapm.1c00970.pdf</field>
        <field name="checksum">b8d72fd404e4658acbe77a2218b79c9d</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">1</field>
        </element>
      </element>
    </element>
  2. <element name="bundle">
    1. <field name="name">CC-LICENSE</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">license_rdf</field>
        <field name="originalName">license_rdf</field>
        <field name="format">application/rdf+xml; charset=utf-8</field>
        <field name="size">907</field>
        <field name="url">https://eciencia.urjc.es/bitstream/10115/19090/2/license_rdf</field>
        <field name="checksum">c07b6daef3dbee864bf87e6aa836cde2</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">2</field>
        </element>
      </element>
    </element>
  3. <element name="bundle">
    1. <field name="name">TEXT</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">acsapm.1c00970.pdf.txt</field>
        <field name="originalName">acsapm.1c00970.pdf.txt</field>
        <field name="description">Extracted text</field>
        <field name="format">text/plain</field>
        <field name="size">43329</field>
        <field name="url">https://eciencia.urjc.es/bitstream/10115/19090/3/acsapm.1c00970.pdf.txt</field>
        <field name="checksum">dd5630cf1f3ab97826b9289123d541ea</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">3</field>
        </element>
      </element>
    </element>
  4. <element name="bundle">
    1. <field name="name">THUMBNAIL</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">acsapm.1c00970.pdf.jpg</field>
        <field name="originalName">acsapm.1c00970.pdf.jpg</field>
        <field name="description">Generated Thumbnail</field>
        <field name="format">image/jpeg</field>
        <field name="size">2473</field>
        <field name="url">https://eciencia.urjc.es/bitstream/10115/19090/4/acsapm.1c00970.pdf.jpg</field>
        <field name="checksum">d1264e54d90c8ffcc74c2a993bc936c5</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">4</field>
        </element>
      </element>
    </element>
  </element>
3. <element name="others">
  1. <field name="handle">10115/19090</field>
  2. <field name="identifier">oai:eciencia.urjc.es:10115/19090</field>
  3. <field name="lastModifyDate">2022-05-23 09:49:35.09</field>
  </element>
4. <element name="repository">
  1. <field name="name">Archivo Abierto Institucional de la Universidad Rey Juan Carlos</field>
  2. <field name="mail">biblioteca.proyectoeciencia@urjc.es</field>
  </element>
</metadata>