Hispana. Acceso en línea al Patrimonio Cultural Digital Español

Está en:  › Datos de registro

3D printing as an enabling technology to implement maritime plastic Circular Economy

Identificadores del recurso

Procedia Manufacturing, 51, 635-641 (2020)

23519789

http://hdl.handle.net/11093/3886

10.1016/j.promfg.2020.10.089

https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466

Procedencia

(Investigo)

Ficha

Título:: 3D printing as an enabling technology to implement maritime plastic Circular Economy
Tema:: 3304.17 Sistemas en Tiempo Real; 3310.05 Ingeniería de Procesos; 1203.05 Sistemas Automatizados de Producción
Descripción:: CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.
Idioma:: English
Autor/Productor:: Garrido Campos, Julio; Saez Lopez, Juan; Armesto Quiroga, José Ignacio; Espada Seoane, Anxo Manuel; Silva Muñiz, Diego; Goikoetxea, J.; Arrillaga, Alex; Lekube, Blanca María
Editor:: Procedia Manufacturing; Ecoloxía e bioloxía animal; Enxeñaría de sistemas e automática; Bioloxía Ambiental; Enxeñería Eficiente e Dixital
Derechos:: Attribution-NonCommercial-NoDerivatives 4.0 International; https://creativecommons.org/licenses/by-nc-nd/4.0/; openAccess
Fecha:: 2022-09-27T06:42:15Z; 2020; 2022-09-26T07:51:11Z
Tipo de recurso:: article

oai_dc

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
1. <dc:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</dc:title>
2. <dc:creator>Garrido Campos, Julio</dc:creator>
3. <dc:creator>Saez Lopez, Juan</dc:creator>
4. <dc:creator>Armesto Quiroga, José Ignacio</dc:creator>
5. <dc:creator>Espada Seoane, Anxo Manuel</dc:creator>
6. <dc:creator>Silva Muñiz, Diego</dc:creator>
7. <dc:creator>Goikoetxea, J.</dc:creator>
8. <dc:creator>Arrillaga, Alex</dc:creator>
9. <dc:creator>Lekube, Blanca María</dc:creator>
10. <dc:subject>3304.17 Sistemas en Tiempo Real</dc:subject>
11. <dc:subject>3310.05 Ingeniería de Procesos</dc:subject>
12. <dc:subject>1203.05 Sistemas Automatizados de Producción</dc:subject>
13. <dc:description>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dc:description>
14. <dc:date>2022-09-27T06:42:15Z</dc:date>
15. <dc:date>2022-09-27T06:42:15Z</dc:date>
16. <dc:date>2020</dc:date>
17. <dc:date>2022-09-26T07:51:11Z</dc:date>
18. <dc:type>article</dc:type>
19. <dc:identifier>Procedia Manufacturing, 51, 635-641 (2020)</dc:identifier>
20. <dc:identifier>23519789</dc:identifier>
21. <dc:identifier>http://hdl.handle.net/11093/3886</dc:identifier>
22. <dc:identifier>10.1016/j.promfg.2020.10.089</dc:identifier>
23. <dc:identifier>https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dc:identifier>
24. <dc:language>eng</dc:language>
25. <dc:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dc:rights>
26. <dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights>
27. <dc:rights>openAccess</dc:rights>
28. <dc:publisher>Procedia Manufacturing</dc:publisher>
29. <dc:publisher>Ecoloxía e bioloxía animal</dc:publisher>
30. <dc:publisher>Enxeñaría de sistemas e automática</dc:publisher>
31. <dc:publisher>Bioloxía Ambiental</dc:publisher>
32. <dc:publisher>Enxeñería Eficiente e Dixital</dc:publisher>
</oai_dc:dc>

didl

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<d:DIDL schemaLocation="urn:mpeg:mpeg21:2002:02-DIDL-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/did/didl.xsd">
1. <d:DIDLInfo>
  1. <dcterms:created schemaLocation="http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/dcterms.xsd">2022-09-27T06:42:15Z</dcterms:created>
  </d:DIDLInfo>
2. <d:Item id="hdl_11093_3886">
  1. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <dii:Identifier schemaLocation="urn:mpeg:mpeg21:2002:01-DII-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/dii/dii.xsd">urn:hdl:11093/3886</dii:Identifier>
      </d:Statement>
    </d:Descriptor>
  2. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</dc:title>
        <dc:creator>Garrido Campos, Julio</dc:creator>
        <dc:creator>Saez Lopez, Juan</dc:creator>
        <dc:creator>Armesto Quiroga, José Ignacio</dc:creator>
        <dc:creator>Espada Seoane, Anxo Manuel</dc:creator>
        <dc:creator>Silva Muñiz, Diego</dc:creator>
        <dc:creator>Goikoetxea, J.</dc:creator>
        <dc:creator>Arrillaga, Alex</dc:creator>
        <dc:creator>Lekube, Blanca María</dc:creator>
        <dc:description>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dc:description>
        <dc:date>2022-09-27T06:42:15Z</dc:date>
        <dc:date>2022-09-27T06:42:15Z</dc:date>
        <dc:date>2020</dc:date>
        <dc:date>2022-09-26T07:51:11Z</dc:date>
        <dc:type>article</dc:type>
        <dc:identifier>Procedia Manufacturing, 51, 635-641 (2020)</dc:identifier>
        <dc:identifier>23519789</dc:identifier>
        <dc:identifier>http://hdl.handle.net/11093/3886</dc:identifier>
        <dc:identifier>10.1016/j.promfg.2020.10.089</dc:identifier>
        <dc:identifier>https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dc:identifier>
        <dc:language>eng</dc:language>
        <dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights>
        <dc:rights>openAccess</dc:rights>
        <dc:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dc:rights>
        <dc:publisher>Procedia Manufacturing</dc:publisher>
        <dc:publisher>Ecoloxía e bioloxía animal</dc:publisher>
        <dc:publisher>Enxeñaría de sistemas e automática</dc:publisher>
        <dc:publisher>Bioloxía Ambiental</dc:publisher>
        <dc:publisher>Enxeñería Eficiente e Dixital</dc:publisher>
        </oai_dc:dc>
      </d:Statement>
    </d:Descriptor>
  3. <d:Component id="11093_3886_1">
    1. <d:Resource mimeType="application/pdf" ref="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf" />
    </d:Component>
  </d:Item>
</d:DIDL>

dim

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<dim:dim schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
1. <dim:field authority="922" confidence="600" element="contributor" mdschema="dc" qualifier="author">Garrido Campos, Julio</dim:field>
2. <dim:field authority="921" confidence="600" element="contributor" mdschema="dc" qualifier="author">Saez Lopez, Juan</dim:field>
3. <dim:field authority="774" confidence="600" element="contributor" mdschema="dc" qualifier="author">Armesto Quiroga, José Ignacio</dim:field>
4. <dim:field authority="164" confidence="600" element="contributor" mdschema="dc" qualifier="author">Espada Seoane, Anxo Manuel</dim:field>
5. <dim:field authority="8902" confidence="600" element="contributor" mdschema="dc" qualifier="author">Silva Muñiz, Diego</dim:field>
6. <dim:field authority="91723089-dde8-4d6b-8e9d-782f94a53ef9" confidence="500" element="contributor" mdschema="dc" qualifier="author">Goikoetxea, J.</dim:field>
7. <dim:field authority="6fd3d9e4-1039-4c39-a417-64e3727b0401" confidence="500" element="contributor" mdschema="dc" qualifier="author">Arrillaga, Alex</dim:field>
8. <dim:field authority="253ac53f-3d5c-4036-a27b-8a824b0bad50" confidence="500" element="contributor" mdschema="dc" qualifier="author">Lekube, Blanca María</dim:field>
9. <dim:field element="date" mdschema="dc" qualifier="accessioned">2022-09-27T06:42:15Z</dim:field>
10. <dim:field element="date" mdschema="dc" qualifier="available">2022-09-27T06:42:15Z</dim:field>
11. <dim:field element="date" mdschema="dc" qualifier="issued">2020</dim:field>
12. <dim:field element="date" mdschema="dc" qualifier="updated">2022-09-26T07:51:11Z</dim:field>
13. <dim:field element="identifier" lang="spa" mdschema="dc" qualifier="citation">Procedia Manufacturing, 51, 635-641 (2020)</dim:field>
14. <dim:field element="identifier" mdschema="dc" qualifier="issn">23519789</dim:field>
15. <dim:field element="identifier" mdschema="dc" qualifier="uri">http://hdl.handle.net/11093/3886</dim:field>
16. <dim:field element="identifier" mdschema="dc" qualifier="doi">10.1016/j.promfg.2020.10.089</dim:field>
17. <dim:field element="identifier" lang="spa" mdschema="dc" qualifier="editor">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dim:field>
18. <dim:field element="description" lang="spa" mdschema="dc" qualifier="abstract">CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dim:field>
19. <dim:field element="language" lang="spa" mdschema="dc" qualifier="iso">eng</dim:field>
20. <dim:field element="publisher" lang="spa" mdschema="dc">Procedia Manufacturing</dim:field>
21. <dim:field element="publisher" lang="spa" mdschema="dc" qualifier="departamento">Ecoloxía e bioloxía animal</dim:field>
22. <dim:field element="publisher" lang="spa" mdschema="dc" qualifier="departamento">Enxeñaría de sistemas e automática</dim:field>
23. <dim:field element="publisher" lang="spa" mdschema="dc" qualifier="grupoinvestigacion">Bioloxía Ambiental</dim:field>
24. <dim:field element="publisher" lang="spa" mdschema="dc" qualifier="grupoinvestigacion">Enxeñería Eficiente e Dixital</dim:field>
25. <dim:field element="rights" mdschema="dc">Attribution-NonCommercial-NoDerivatives 4.0 International</dim:field>
26. <dim:field element="rights" mdschema="dc" qualifier="uri">https://creativecommons.org/licenses/by-nc-nd/4.0/</dim:field>
27. <dim:field element="rights" lang="spa" mdschema="dc" qualifier="accessRights">openAccess</dim:field>
28. <dim:field element="title" lang="en" mdschema="dc">3D printing as an enabling technology to implement maritime plastic Circular Economy</dim:field>
29. <dim:field element="type" lang="spa" mdschema="dc">article</dim:field>
30. <dim:field element="subject" lang="spa" mdschema="dc" qualifier="unesco">3304.17 Sistemas en Tiempo Real</dim:field>
31. <dim:field element="subject" lang="spa" mdschema="dc" qualifier="unesco">3310.05 Ingeniería de Procesos</dim:field>
32. <dim:field element="subject" lang="spa" mdschema="dc" qualifier="unesco">1203.05 Sistemas Automatizados de Producción</dim:field>
33. <dim:field element="computerCitation" lang="spa" mdschema="dc">pub_title=Procedia Manufacturing|volume=51|journal_number=|start_pag=635|end_pag=641</dim:field>
</dim:dim>

etdms

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<thesis schemaLocation="http://www.ndltd.org/standards/metadata/etdms/1.0/ http://www.ndltd.org/standards/metadata/etdms/1.0/etdms.xsd">
1. <title>3D printing as an enabling technology to implement maritime plastic Circular Economy</title>
2. <creator>Garrido Campos, Julio</creator>
3. <creator>Saez Lopez, Juan</creator>
4. <creator>Armesto Quiroga, José Ignacio</creator>
5. <creator>Espada Seoane, Anxo Manuel</creator>
6. <creator>Silva Muñiz, Diego</creator>
7. <creator>Goikoetxea, J.</creator>
8. <creator>Arrillaga, Alex</creator>
9. <creator>Lekube, Blanca María</creator>
10. <description>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</description>
11. <date>2022-09-27</date>
12. <date>2022-09-27</date>
13. <date>2020</date>
14. <date>2022-09-26</date>
15. <type>article</type>
16. <identifier>Procedia Manufacturing, 51, 635-641 (2020)</identifier>
17. <identifier>23519789</identifier>
18. <identifier>http://hdl.handle.net/11093/3886</identifier>
19. <identifier>10.1016/j.promfg.2020.10.089</identifier>
20. <identifier>https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</identifier>
21. <language>eng</language>
22. <rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</rights>
23. <rights>openAccess</rights>
24. <rights>Attribution-NonCommercial-NoDerivatives 4.0 International</rights>
25. <publisher>Procedia Manufacturing</publisher>
26. <publisher>Ecoloxía e bioloxía animal</publisher>
27. <publisher>Enxeñaría de sistemas e automática</publisher>
28. <publisher>Bioloxía Ambiental</publisher>
29. <publisher>Enxeñería Eficiente e Dixital</publisher>
</thesis>

marc

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<record schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd">
1. <leader>00925njm 22002777a 4500</leader>
2. <datafield ind1=" " ind2=" " tag="042">
  1. <subfield code="a">dc</subfield>
  </datafield>
3. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Garrido Campos, Julio</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
4. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Saez Lopez, Juan</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
5. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Armesto Quiroga, José Ignacio</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
6. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Espada Seoane, Anxo Manuel</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
7. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Silva Muñiz, Diego</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
8. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Goikoetxea, J.</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
9. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Arrillaga, Alex</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
10. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Lekube, Blanca María</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
11. <datafield ind1=" " ind2=" " tag="260">
  1. <subfield code="c">2020</subfield>
  </datafield>
12. <datafield ind1=" " ind2=" " tag="520">
  1. <subfield code="a">CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</subfield>
  </datafield>
13. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">Procedia Manufacturing, 51, 635-641 (2020)</subfield>
  </datafield>
14. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">23519789</subfield>
  </datafield>
15. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">http://hdl.handle.net/11093/3886</subfield>
  </datafield>
16. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">10.1016/j.promfg.2020.10.089</subfield>
  </datafield>
17. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</subfield>
  </datafield>
18. <datafield ind1="0" ind2="0" tag="245">
  1. <subfield code="a">3D printing as an enabling technology to implement maritime plastic Circular Economy</subfield>
  </datafield>
</record>

mets

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<mets ID=" DSpace_ITEM_11093-3886" OBJID=" hdl:11093/3886" PROFILE="DSpace METS SIP Profile 1.0" TYPE="DSpace ITEM" schemaLocation="http://www.loc.gov/METS/ http://www.loc.gov/standards/mets/mets.xsd">
1. <metsHdr CREATEDATE="2024-09-29T09:07:39Z">
  1. <agent ROLE="CUSTODIAN" TYPE="ORGANIZATION">
    1. <name>Investigo</name>
    </agent>
  </metsHdr>
2. <dmdSec ID="DMD_11093_3886">
  1. <mdWrap MDTYPE="MODS">
    1. <xmlData schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
      1. <mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Garrido Campos, Julio</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Saez Lopez, Juan</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Armesto Quiroga, José Ignacio</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Espada Seoane, Anxo Manuel</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Silva Muñiz, Diego</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Goikoetxea, J.</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Arrillaga, Alex</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Lekube, Blanca María</mods:namePart>
        </mods:name>
        <mods:extension>
        <mods:dateAccessioned encoding="iso8601">2022-09-27T06:42:15Z</mods:dateAccessioned>
        </mods:extension>
        <mods:extension>
        <mods:dateAvailable encoding="iso8601">2022-09-27T06:42:15Z</mods:dateAvailable>
        </mods:extension>
        <mods:originInfo>
        <mods:dateIssued encoding="iso8601">2020</mods:dateIssued>
        </mods:originInfo>
        <mods:identifier type="citation">Procedia Manufacturing, 51, 635-641 (2020)</mods:identifier>
        <mods:identifier type="issn">23519789</mods:identifier>
        <mods:identifier type="uri">http://hdl.handle.net/11093/3886</mods:identifier>
        <mods:identifier type="doi">10.1016/j.promfg.2020.10.089</mods:identifier>
        <mods:identifier type="editor">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</mods:identifier>
        <mods:abstract>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</mods:abstract>
        <mods:language>
        <mods:languageTerm authority="rfc3066">eng</mods:languageTerm>
        </mods:language>
        <mods:accessCondition type="useAndReproduction">Attribution-NonCommercial-NoDerivatives 4.0 International</mods:accessCondition>
        <mods:titleInfo>
        <mods:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</mods:title>
        </mods:titleInfo>
        <mods:genre>article</mods:genre>
        </mods:mods>
      </xmlData>
    </mdWrap>
  </dmdSec>
3. <amdSec ID="TMD_11093_3886">
  1. <rightsMD ID="RIG_11093_3886">
    1. <mdWrap MDTYPE="OTHER" MIMETYPE="text/plain" OTHERMDTYPE="DSpaceDepositLicense">
      1. <binData />
      </mdWrap>
    </rightsMD>
  </amdSec>
4. <amdSec ID="FO_11093_3886_1">
  1. <techMD ID="TECH_O_11093_3886_1">
    1. <mdWrap MDTYPE="PREMIS">
      1. <xmlData schemaLocation="http://www.loc.gov/standards/premis http://www.loc.gov/standards/premis/PREMIS-v1-0.xsd">
        <premis:premis>
        <premis:object>
        <premis:objectIdentifier>
        <premis:objectIdentifierType>URL</premis:objectIdentifierType>
        <premis:objectIdentifierValue>https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf</premis:objectIdentifierValue>
        </premis:objectIdentifier>
        <premis:objectCategory>File</premis:objectCategory>
        <premis:objectCharacteristics>
        <premis:fixity>
        <premis:messageDigestAlgorithm>MD5</premis:messageDigestAlgorithm>
        <premis:messageDigest>f72417e738f9bee4bc523a39955b0236</premis:messageDigest>
        </premis:fixity>
        <premis:size>638767</premis:size>
        <premis:format>
        <premis:formatDesignation>
        <premis:formatName>application/pdf</premis:formatName>
        </premis:formatDesignation>
        </premis:format>
        </premis:objectCharacteristics>
        <premis:originalName>2020_garrido_3D_printing.pdf</premis:originalName>
        </premis:object>
        </premis:premis>
        </xmlData>
      </mdWrap>
    </techMD>
  </amdSec>
5. <amdSec ID="FT_11093_3886_4">
  1. <techMD ID="TECH_T_11093_3886_4">
    1. <mdWrap MDTYPE="PREMIS">
      1. <xmlData schemaLocation="http://www.loc.gov/standards/premis http://www.loc.gov/standards/premis/PREMIS-v1-0.xsd">
        <premis:premis>
        <premis:object>
        <premis:objectIdentifier>
        <premis:objectIdentifierType>URL</premis:objectIdentifierType>
        <premis:objectIdentifierValue>https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/4/2020_garrido_3D_printing.pdf.txt</premis:objectIdentifierValue>
        </premis:objectIdentifier>
        <premis:objectCategory>File</premis:objectCategory>
        <premis:objectCharacteristics>
        <premis:fixity>
        <premis:messageDigestAlgorithm>MD5</premis:messageDigestAlgorithm>
        <premis:messageDigest>936450a6870c4b4a00f796620dd7ddcc</premis:messageDigest>
        </premis:fixity>
        <premis:size>47076</premis:size>
        <premis:format>
        <premis:formatDesignation>
        <premis:formatName>text/plain</premis:formatName>
        </premis:formatDesignation>
        </premis:format>
        </premis:objectCharacteristics>
        <premis:originalName>2020_garrido_3D_printing.pdf.txt</premis:originalName>
        </premis:object>
        </premis:premis>
        </xmlData>
      </mdWrap>
    </techMD>
  </amdSec>
6. <fileSec>
  1. <fileGrp USE="ORIGINAL">
    1. <file ADMID="FO_11093_3886_1" CHECKSUM="f72417e738f9bee4bc523a39955b0236" CHECKSUMTYPE="MD5" GROUPID="GROUP_BITSTREAM_11093_3886_1" ID="BITSTREAM_ORIGINAL_11093_3886_1" MIMETYPE="application/pdf" SEQ="1" SIZE="638767">
      1. <FLocat LOCTYPE="URL" href="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf" type="simple" />
      </file>
    </fileGrp>
  2. <fileGrp USE="TEXT">
    1. <file ADMID="FT_11093_3886_4" CHECKSUM="936450a6870c4b4a00f796620dd7ddcc" CHECKSUMTYPE="MD5" GROUPID="GROUP_BITSTREAM_11093_3886_4" ID="BITSTREAM_TEXT_11093_3886_4" MIMETYPE="text/plain" SEQ="4" SIZE="47076">
      1. <FLocat LOCTYPE="URL" href="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/4/2020_garrido_3D_printing.pdf.txt" type="simple" />
      </file>
    </fileGrp>
  </fileSec>
7. <structMap LABEL="DSpace Object" TYPE="LOGICAL">
  1. <div ADMID="DMD_11093_3886" TYPE="DSpace Object Contents">
    1. <div TYPE="DSpace BITSTREAM">
      1. <fptr FILEID="BITSTREAM_ORIGINAL_11093_3886_1" />
      </div>
    </div>
  </structMap>
</mets>

mods

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
1. <mods:name>
  1. <mods:namePart>Garrido Campos, Julio</mods:namePart>
  </mods:name>
2. <mods:name>
  1. <mods:namePart>Saez Lopez, Juan</mods:namePart>
  </mods:name>
3. <mods:name>
  1. <mods:namePart>Armesto Quiroga, José Ignacio</mods:namePart>
  </mods:name>
4. <mods:name>
  1. <mods:namePart>Espada Seoane, Anxo Manuel</mods:namePart>
  </mods:name>
5. <mods:name>
  1. <mods:namePart>Silva Muñiz, Diego</mods:namePart>
  </mods:name>
6. <mods:name>
  1. <mods:namePart>Goikoetxea, J.</mods:namePart>
  </mods:name>
7. <mods:name>
  1. <mods:namePart>Arrillaga, Alex</mods:namePart>
  </mods:name>
8. <mods:name>
  1. <mods:namePart>Lekube, Blanca María</mods:namePart>
  </mods:name>
9. <mods:extension>
  1. <mods:dateAvailable encoding="iso8601">2022-09-27T06:42:15Z</mods:dateAvailable>
  </mods:extension>
10. <mods:extension>
  1. <mods:dateAccessioned encoding="iso8601">2022-09-27T06:42:15Z</mods:dateAccessioned>
  </mods:extension>
11. <mods:originInfo>
  1. <mods:dateIssued encoding="iso8601">2020</mods:dateIssued>
  </mods:originInfo>
12. <mods:identifier type="citation">Procedia Manufacturing, 51, 635-641 (2020)</mods:identifier>
13. <mods:identifier type="issn">23519789</mods:identifier>
14. <mods:identifier type="uri">http://hdl.handle.net/11093/3886</mods:identifier>
15. <mods:identifier type="doi">10.1016/j.promfg.2020.10.089</mods:identifier>
16. <mods:identifier type="editor">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</mods:identifier>
17. <mods:abstract>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</mods:abstract>
18. <mods:language>
  1. <mods:languageTerm>eng</mods:languageTerm>
  </mods:language>
19. <mods:accessCondition type="useAndReproduction">https://creativecommons.org/licenses/by-nc-nd/4.0/</mods:accessCondition>
20. <mods:accessCondition type="useAndReproduction">openAccess</mods:accessCondition>
21. <mods:accessCondition type="useAndReproduction">Attribution-NonCommercial-NoDerivatives 4.0 International</mods:accessCondition>
22. <mods:titleInfo>
  1. <mods:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</mods:title>
  </mods:titleInfo>
23. <mods:genre>article</mods:genre>
</mods:mods>

ore

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<atom:entry schemaLocation="http://www.w3.org/2005/Atom http://www.kbcafe.com/rss/atom.xsd.xml">
1. <atom:id>http://hdl.handle.net/11093/3886/ore.xml</atom:id>
2. <atom:link href="http://hdl.handle.net/11093/3886" rel="alternate" />
3. <atom:link href="http://hdl.handle.net/11093/3886/ore.xml" rel="http://www.openarchives.org/ore/terms/describes" />
4. <atom:link href="http://hdl.handle.net/11093/3886/ore.xml#atom" rel="self" type="application/atom+xml" />
5. <atom:published>2022-09-27T06:42:15Z</atom:published>
6. <atom:updated>2022-09-27T06:42:15Z</atom:updated>
7. <atom:source>
  1. <atom:generator>Investigo</atom:generator>
  </atom:source>
8. <atom:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</atom:title>
9. <atom:author>
  1. <atom:name>Garrido Campos, Julio</atom:name>
  </atom:author>
10. <atom:author>
  1. <atom:name>Saez Lopez, Juan</atom:name>
  </atom:author>
11. <atom:author>
  1. <atom:name>Armesto Quiroga, José Ignacio</atom:name>
  </atom:author>
12. <atom:author>
  1. <atom:name>Espada Seoane, Anxo Manuel</atom:name>
  </atom:author>
13. <atom:author>
  1. <atom:name>Silva Muñiz, Diego</atom:name>
  </atom:author>
14. <atom:author>
  1. <atom:name>Goikoetxea, J.</atom:name>
  </atom:author>
15. <atom:author>
  1. <atom:name>Arrillaga, Alex</atom:name>
  </atom:author>
16. <atom:author>
  1. <atom:name>Lekube, Blanca María</atom:name>
  </atom:author>
17. <atom:category label="Aggregation" scheme="http://www.openarchives.org/ore/terms/" term="http://www.openarchives.org/ore/terms/Aggregation" />
18. <atom:category scheme="http://www.openarchives.org/ore/atom/modified" term="2022-09-27T06:42:15Z" />
19. <atom:category label="DSpace Item" scheme="http://www.dspace.org/objectModel/" term="DSpaceItem" />
20. <atom:link href="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf" length="638767" rel="http://www.openarchives.org/ore/terms/aggregates" title="2020_garrido_3D_printing.pdf" type="application/pdf" />
21. <oreatom:triples>
  1. <rdf:Description about="http://hdl.handle.net/11093/3886/ore.xml#atom">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceItem" />
    2. <dcterms:modified>2022-09-27T06:42:15Z</dcterms:modified>
    </rdf:Description>
  2. <rdf:Description about="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>ORIGINAL</dcterms:description>
    </rdf:Description>
  3. <rdf:Description about="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/2/license.txt">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>LICENSE</dcterms:description>
    </rdf:Description>
  4. <rdf:Description about="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/3/sword.zip">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>SWORD</dcterms:description>
    </rdf:Description>
  5. <rdf:Description about="https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/4/2020_garrido_3D_printing.pdf.txt">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>TEXT</dcterms:description>
    </rdf:Description>
  </oreatom:triples>
</atom:entry>

qdc

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<qdc:qualifieddc schemaLocation="http://purl.org/dc/elements/1.1/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dc.xsd http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dcterms.xsd http://dspace.org/qualifieddc/ http://www.ukoln.ac.uk/metadata/dcmi/xmlschema/qualifieddc.xsd">
1. <dc:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</dc:title>
2. <dc:creator>Garrido Campos, Julio</dc:creator>
3. <dc:creator>Saez Lopez, Juan</dc:creator>
4. <dc:creator>Armesto Quiroga, José Ignacio</dc:creator>
5. <dc:creator>Espada Seoane, Anxo Manuel</dc:creator>
6. <dc:creator>Silva Muñiz, Diego</dc:creator>
7. <dc:creator>Goikoetxea, J.</dc:creator>
8. <dc:creator>Arrillaga, Alex</dc:creator>
9. <dc:creator>Lekube, Blanca María</dc:creator>
10. <dcterms:abstract>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dcterms:abstract>
11. <dcterms:dateAccepted>2022-09-27T06:42:15Z</dcterms:dateAccepted>
12. <dcterms:available>2022-09-27T06:42:15Z</dcterms:available>
13. <dcterms:created>2022-09-27T06:42:15Z</dcterms:created>
14. <dcterms:issued>2020</dcterms:issued>
15. <dc:type>article</dc:type>
16. <dc:identifier>Procedia Manufacturing, 51, 635-641 (2020)</dc:identifier>
17. <dc:identifier>23519789</dc:identifier>
18. <dc:identifier>http://hdl.handle.net/11093/3886</dc:identifier>
19. <dc:identifier>10.1016/j.promfg.2020.10.089</dc:identifier>
20. <dc:identifier>https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dc:identifier>
21. <dc:language>eng</dc:language>
22. <dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights>
23. <dc:rights>openAccess</dc:rights>
24. <dc:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dc:rights>
25. <dc:publisher>Procedia Manufacturing</dc:publisher>
26. <dc:publisher>Ecoloxía e bioloxía animal</dc:publisher>
27. <dc:publisher>Enxeñaría de sistemas e automática</dc:publisher>
28. <dc:publisher>Bioloxía Ambiental</dc:publisher>
29. <dc:publisher>Enxeñería Eficiente e Dixital</dc:publisher>
</qdc:qualifieddc>

rdf

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<rdf:RDF schemaLocation="http://www.openarchives.org/OAI/2.0/rdf/ http://www.openarchives.org/OAI/2.0/rdf.xsd">
1. <ow:Publication about="oai:www.investigo.biblioteca.uvigo.es:11093/3886">
  1. <dc:title>3D printing as an enabling technology to implement maritime plastic Circular Economy</dc:title>
  2. <dc:creator>Garrido Campos, Julio</dc:creator>
  3. <dc:creator>Saez Lopez, Juan</dc:creator>
  4. <dc:creator>Armesto Quiroga, José Ignacio</dc:creator>
  5. <dc:creator>Espada Seoane, Anxo Manuel</dc:creator>
  6. <dc:creator>Silva Muñiz, Diego</dc:creator>
  7. <dc:creator>Goikoetxea, J.</dc:creator>
  8. <dc:creator>Arrillaga, Alex</dc:creator>
  9. <dc:creator>Lekube, Blanca María</dc:creator>
  10. <dc:description>CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dc:description>
  11. <dc:date>2022-09-27T06:42:15Z</dc:date>
  12. <dc:date>2022-09-27T06:42:15Z</dc:date>
  13. <dc:date>2020</dc:date>
  14. <dc:date>2022-09-26T07:51:11Z</dc:date>
  15. <dc:type>article</dc:type>
  16. <dc:identifier>Procedia Manufacturing, 51, 635-641 (2020)</dc:identifier>
  17. <dc:identifier>23519789</dc:identifier>
  18. <dc:identifier>http://hdl.handle.net/11093/3886</dc:identifier>
  19. <dc:identifier>10.1016/j.promfg.2020.10.089</dc:identifier>
  20. <dc:identifier>https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dc:identifier>
  21. <dc:language>eng</dc:language>
  22. <dc:rights>https://creativecommons.org/licenses/by-nc-nd/4.0/</dc:rights>
  23. <dc:rights>openAccess</dc:rights>
  24. <dc:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dc:rights>
  25. <dc:publisher>Procedia Manufacturing</dc:publisher>
  26. <dc:publisher>Ecoloxía e bioloxía animal</dc:publisher>
  27. <dc:publisher>Enxeñaría de sistemas e automática</dc:publisher>
  28. <dc:publisher>Bioloxía Ambiental</dc:publisher>
  29. <dc:publisher>Enxeñería Eficiente e Dixital</dc:publisher>
  </ow:Publication>
</rdf:RDF>

suxi

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
1. <dcterms:dateAccepted>2022-09-27T06:42:15Z</dcterms:dateAccepted>
2. <dcterms:available>2022-09-27T06:42:15Z</dcterms:available>
3. <dcterms:issued>2020</dcterms:issued>
4. <dcterms:identifier_bibliographicCitation lang="spa">Procedia Manufacturing, 51, 635-641 (2020)</dcterms:identifier_bibliographicCitation>
5. <dcterms:identifier_issn>23519789</dcterms:identifier_issn>
6. <dcterms:identifier_doi>10.1016/j.promfg.2020.10.089</dcterms:identifier_doi>
7. <dcterms:identifier type="dcterms:URI">http://hdl.handle.net/11093/3886</dcterms:identifier>
8. <dcterms:identifier_editor lang="spa">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</dcterms:identifier_editor>
9. <dcterms:abstract lang="spa">CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</dcterms:abstract>
10. <dcterms:language type="dcterms:ISO639-2" lang="spa">eng</dcterms:language>
11. <dcterms:publisher lang="spa">Procedia Manufacturing</dcterms:publisher>
12. <dcterms:rights>Attribution-NonCommercial-NoDerivatives 4.0 International</dcterms:rights>
13. <dcterms:accessRights lang="spa">openAccess</dcterms:accessRights>
14. <dcterms:rights_uri type="dcterms:URI">https://creativecommons.org/licenses/by-nc-nd/4.0/</dcterms:rights_uri>
15. <dcterms:title lang="en">3D printing as an enabling technology to implement maritime plastic Circular Economy</dcterms:title>
16. <dcterms:type lang="spa">article</dcterms:type>
17. <dcterms:computerCitation lang="spa">pub_title=Procedia Manufacturing|volume=51|journal_number=|start_pag=635|end_pag=641</dcterms:computerCitation>
18. <dcterms:publisher_department lang="spa">Ecoloxía e bioloxía animal</dcterms:publisher_department>
19. <dcterms:publisher_department lang="spa">Enxeñaría de sistemas e automática</dcterms:publisher_department>
20. <dcterms:publisher_group lang="spa">Bioloxía Ambiental</dcterms:publisher_group>
21. <dcterms:publisher_group lang="spa">Enxeñería Eficiente e Dixital</dcterms:publisher_group>
22. <dcterms:subject lang="spa">3304.17 Sistemas en Tiempo Real</dcterms:subject>
23. <dcterms:subject lang="spa">3310.05 Ingeniería de Procesos</dcterms:subject>
24. <dcterms:subject lang="spa">1203.05 Sistemas Automatizados de Producción</dcterms:subject>
25. <dcterms:authorList>922#921#774#164#8902#Goikoetxea, J.#Arrillaga, Alex#Lekube, Blanca María</dcterms:authorList>
26. <dcterms:editorList />
</oai_dc:dc>

xoai

Descargar XML

<?xml version="1.0" encoding="UTF-8" ?>

<metadata schemaLocation="http://www.lyncode.com/xoai http://www.lyncode.com/xsd/xoai.xsd">
1. <element name="dc">
  1. <element name="contributor">
    1. <element name="author">
      1. <element name="none">
        <field name="value">Garrido Campos, Julio</field>
        <field name="authority">922</field>
        <field name="confidence">600</field>
        <field name="value">Saez Lopez, Juan</field>
        <field name="authority">921</field>
        <field name="confidence">600</field>
        <field name="value">Armesto Quiroga, José Ignacio</field>
        <field name="authority">774</field>
        <field name="confidence">600</field>
        <field name="value">Espada Seoane, Anxo Manuel</field>
        <field name="authority">164</field>
        <field name="confidence">600</field>
        <field name="value">Silva Muñiz, Diego</field>
        <field name="authority">8902</field>
        <field name="confidence">600</field>
        <field name="value">Goikoetxea, J.</field>
        <field name="authority">91723089-dde8-4d6b-8e9d-782f94a53ef9</field>
        <field name="confidence">500</field>
        <field name="value">Arrillaga, Alex</field>
        <field name="authority">6fd3d9e4-1039-4c39-a417-64e3727b0401</field>
        <field name="confidence">500</field>
        <field name="value">Lekube, Blanca María</field>
        <field name="authority">253ac53f-3d5c-4036-a27b-8a824b0bad50</field>
        <field name="confidence">500</field>
        </element>
      </element>
    </element>
  2. <element name="date">
    1. <element name="accessioned">
      1. <element name="none">
        <field name="value">2022-09-27T06:42:15Z</field>
        </element>
      </element>
    2. <element name="available">
      1. <element name="none">
        <field name="value">2022-09-27T06:42:15Z</field>
        </element>
      </element>
    3. <element name="issued">
      1. <element name="none">
        <field name="value">2020</field>
        </element>
      </element>
    4. <element name="updated">
      1. <element name="none">
        <field name="value">2022-09-26T07:51:11Z</field>
        </element>
      </element>
    </element>
  3. <element name="identifier">
    1. <element name="citation">
      1. <element name="spa">
        <field name="value">Procedia Manufacturing, 51, 635-641 (2020)</field>
        </element>
      </element>
    2. <element name="issn">
      1. <element name="none">
        <field name="value">23519789</field>
        </element>
      </element>
    3. <element name="uri">
      1. <element name="none">
        <field name="value">http://hdl.handle.net/11093/3886</field>
        </element>
      </element>
    4. <element name="doi">
      1. <element name="none">
        <field name="value">10.1016/j.promfg.2020.10.089</field>
        </element>
      </element>
    5. <element name="editor">
      1. <element name="spa">
        <field name="value">https://linkinghub.elsevier.com/retrieve/pii/S2351978920319466</field>
        </element>
      </element>
    </element>
  4. <element name="description">
    1. <element name="abstract">
      1. <element name="spa">
        <field name="value">CircularSeas European Project, as part of the European Union Circular Economy [1], aims at promoting the Green Economy by encouraging the development of green products, parts and components by Maritime Industries. The strategy is a combination of Circular Economy principles, with the use of ocean plastic waste for developing new greener materials, and the uptake of advanced manufacturing technology, 3D printing, flexible enough to adapt to the manufacturing conditions for new eco-innovative small and medium parts and components. The paper presents the ongoing research in the project about strategies to introduce Circular Economy in the maritime sector from plastic wastes. This first prospective phase is focused on a series of interviews with each node stakeholders. The paper presents the survey results, together with the challenges to be faced for the implementation of Circular Economy in that specific scenario, despite the -apriori- short term low-profit disadvantages.</field>
        </element>
      </element>
    </element>
  5. <element name="language">
    1. <element name="iso">
      1. <element name="spa">
        <field name="value">eng</field>
        </element>
      </element>
    </element>
  6. <element name="publisher">
    1. <element name="spa">
      1. <field name="value">Procedia Manufacturing</field>
      </element>
    2. <element name="departamento">
      1. <element name="spa">
        <field name="value">Ecoloxía e bioloxía animal</field>
        <field name="value">Enxeñaría de sistemas e automática</field>
        </element>
      </element>
    3. <element name="grupoinvestigacion">
      1. <element name="spa">
        <field name="value">Bioloxía Ambiental</field>
        <field name="value">Enxeñería Eficiente e Dixital</field>
        </element>
      </element>
    </element>
  7. <element name="rights">
    1. <element name="none">
      1. <field name="value">Attribution-NonCommercial-NoDerivatives 4.0 International</field>
      </element>
    2. <element name="uri">
      1. <element name="none">
        <field name="value">https://creativecommons.org/licenses/by-nc-nd/4.0/</field>
        </element>
      </element>
    3. <element name="accessRights">
      1. <element name="spa">
        <field name="value">openAccess</field>
        </element>
      </element>
    </element>
  8. <element name="title">
    1. <element name="en">
      1. <field name="value">3D printing as an enabling technology to implement maritime plastic Circular Economy</field>
      </element>
    </element>
  9. <element name="type">
    1. <element name="spa">
      1. <field name="value">article</field>
      </element>
    </element>
  10. <element name="subject">
    1. <element name="unesco">
      1. <element name="spa">
        <field name="value">3304.17 Sistemas en Tiempo Real</field>
        <field name="value">3310.05 Ingeniería de Procesos</field>
        <field name="value">1203.05 Sistemas Automatizados de Producción</field>
        </element>
      </element>
    </element>
  11. <element name="computerCitation">
    1. <element name="spa">
      1. <field name="value">pub_title=Procedia Manufacturing|volume=51|journal_number=|start_pag=635|end_pag=641</field>
      </element>
    </element>
  </element>
2. <element name="bundles">
  1. <element name="bundle">
    1. <field name="name">ORIGINAL</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">2020_garrido_3D_printing.pdf</field>
        <field name="format">application/pdf</field>
        <field name="size">638767</field>
        <field name="url">https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/1/2020_garrido_3D_printing.pdf</field>
        <field name="checksum">f72417e738f9bee4bc523a39955b0236</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">1</field>
        <field name="drm">open access</field>
        </element>
      </element>
    </element>
  2. <element name="bundle">
    1. <field name="name">LICENSE</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">license.txt</field>
        <field name="originalName">license.txt</field>
        <field name="format">text/plain; charset=utf-8</field>
        <field name="size">0</field>
        <field name="url">https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/2/license.txt</field>
        <field name="checksum">d41d8cd98f00b204e9800998ecf8427e</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">2</field>
        <field name="drm">open access</field>
        </element>
      </element>
    </element>
  3. <element name="bundle">
    1. <field name="name">SWORD</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">sword.zip</field>
        <field name="description">SWORD deposit package</field>
        <field name="format">application/zip</field>
        <field name="size">565506</field>
        <field name="url">https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/3/sword.zip</field>
        <field name="checksum">93663ad59bed0be81a028f9f30adc902</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">3</field>
        <field name="drm">open access</field>
        </element>
      </element>
    </element>
  4. <element name="bundle">
    1. <field name="name">TEXT</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">2020_garrido_3D_printing.pdf.txt</field>
        <field name="originalName">2020_garrido_3D_printing.pdf.txt</field>
        <field name="description">Extracted text</field>
        <field name="format">text/plain</field>
        <field name="size">47076</field>
        <field name="url">https://www.investigo.biblioteca.uvigo.es/xmlui/bitstream/11093/3886/4/2020_garrido_3D_printing.pdf.txt</field>
        <field name="checksum">936450a6870c4b4a00f796620dd7ddcc</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">4</field>
        <field name="drm">open access</field>
        </element>
      </element>
    </element>
  </element>
3. <element name="others">
  1. <field name="handle">11093/3886</field>
  2. <field name="identifier">oai:www.investigo.biblioteca.uvigo.es:11093/3886</field>
  3. <field name="lastModifyDate">2023-05-03 12:28:32.888</field>
  4. <field name="drm">open access</field>
  </element>
4. <element name="repository">
  1. <field name="name">Investigo</field>
  2. <field name="mail">investigo@uvigo.es</field>
  </element>
5. <element name="license">
  1. <field name="bin" />
  </element>
</metadata>