Hispana. Acceso en línea al Patrimonio Cultural Digital Español

Está en:  › Record data

3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna

Identificadores del recurso

DOI 10.1109/GSMM.2015.7175434

http://ria.asturias.es/RIA/handle/123456789/6661

Origin

(Repositorio Institucional de Asturias: RIA)

File

Title:: 3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna
Tema:: Graphene subharmonic mixer; 3d printed; Publicado
Description:: This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.; This work has been supported by the European Union Seventh Framework Programme (FP/2007-2013) under grant agreement number 600849, by the "Ministerio de Ciencia e Innovacion" of Spain/FEDER under projects TEC2008-01638/TEC, TEC2011/24492, IPT-2011-0951-390000 and CONSOLIDER-INGENIO CSD2008-00068, grant AP2012-2020, by the Gobierno del Principado de Asturias (PCTI)/FEDER-FSE under projects EQUIP08-06, FC09-COF09-12, EQUIP10-31, GRUPIN14-114, grant BP13034 and by Catedra Telefonica - Universidad de Oviedo.
Source:: 1;3
Idioma:: English
Relation:: Millimeter Waves (GSMM), 2015 Global Symposium On; Sí, esta versión ha sido citada
Autor/Productor:: Hadarig, Andreea; Ver Hoeye, Samuel; Vázquez, Carlos; Camblor, René; Fernández, Miguel; Hotopan, George; Alonso, Leticia; Las Heras, Fernando
Publisher:: IEEE
Rights:: http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es
Date:: 2016-06-16T11:15:32Z; 2015-05
Tipo de recurso:: article
Format:: application/pdf

oai_dc

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
1. <dc:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</dc:title>
2. <dc:creator>Hadarig, Andreea</dc:creator>
3. <dc:creator>Ver Hoeye, Samuel</dc:creator>
4. <dc:creator>Vázquez, Carlos</dc:creator>
5. <dc:creator>Camblor, René</dc:creator>
6. <dc:creator>Fernández, Miguel</dc:creator>
7. <dc:creator>Hotopan, George</dc:creator>
8. <dc:creator>Alonso, Leticia</dc:creator>
9. <dc:creator>Las Heras, Fernando</dc:creator>
10. <dc:subject>Graphene subharmonic mixer</dc:subject>
11. <dc:subject>3d printed</dc:subject>
12. <dc:subject>Publicado</dc:subject>
13. <dc:description>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</dc:description>
14. <dc:description>This work has been supported by the European Union Seventh Framework Programme (FP/2007-2013) under grant agreement number 600849, by the "Ministerio de Ciencia e Innovacion" of Spain/FEDER under projects TEC2008-01638/TEC, TEC2011/24492, IPT-2011-0951-390000 and CONSOLIDER-INGENIO CSD2008-00068, grant AP2012-2020, by the Gobierno del Principado de Asturias (PCTI)/FEDER-FSE under projects EQUIP08-06, FC09-COF09-12, EQUIP10-31, GRUPIN14-114, grant BP13034 and by Catedra Telefonica - Universidad de Oviedo.</dc:description>
15. <dc:date>2016-06-16T11:15:32Z</dc:date>
16. <dc:date>2016-06-16T11:15:32Z</dc:date>
17. <dc:date>2015-05</dc:date>
18. <dc:type>article</dc:type>
19. <dc:identifier>DOI 10.1109/GSMM.2015.7175434</dc:identifier>
20. <dc:identifier>http://ria.asturias.es/RIA/handle/123456789/6661</dc:identifier>
21. <dc:language>eng</dc:language>
22. <dc:relation>Millimeter Waves (GSMM), 2015 Global Symposium On</dc:relation>
23. <dc:relation>Sí, esta versión ha sido citada</dc:relation>
24. <dc:rights>http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</dc:rights>
25. <dc:format>application/pdf</dc:format>
26. <dc:publisher>IEEE</dc:publisher>
27. <dc:source>1;3</dc:source>
</oai_dc:dc>

didl

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<d:DIDL schemaLocation="urn:mpeg:mpeg21:2002:02-DIDL-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/did/didl.xsd">
1. <d:DIDLInfo>
  1. <dcterms:created schemaLocation="http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/dcterms.xsd">2016-06-16T11:15:32Z</dcterms:created>
  </d:DIDLInfo>
2. <d:Item id="hdl_123456789_6661">
  1. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <dii:Identifier schemaLocation="urn:mpeg:mpeg21:2002:01-DII-NS http://standards.iso.org/ittf/PubliclyAvailableStandards/MPEG-21_schema_files/dii/dii.xsd">urn:hdl:123456789/6661</dii:Identifier>
      </d:Statement>
    </d:Descriptor>
  2. <d:Descriptor>
    1. <d:Statement mimeType="application/xml; charset=utf-8">
      1. <oai_dc:dc schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</dc:title>
        <dc:creator>Hadarig, Andreea</dc:creator>
        <dc:creator>Ver Hoeye, Samuel</dc:creator>
        <dc:creator>Vázquez, Carlos</dc:creator>
        <dc:creator>Camblor, René</dc:creator>
        <dc:creator>Fernández, Miguel</dc:creator>
        <dc:creator>Hotopan, George</dc:creator>
        <dc:creator>Alonso, Leticia</dc:creator>
        <dc:creator>Las Heras, Fernando</dc:creator>
        <dc:subject>Graphene subharmonic mixer</dc:subject>
        <dc:subject>3d printed</dc:subject>
        <dc:description>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</dc:description>
        <dc:date>2016-06-16T11:15:32Z</dc:date>
        <dc:date>2016-06-16T11:15:32Z</dc:date>
        <dc:date>2015-05</dc:date>
        <dc:type>article</dc:type>
        <dc:identifier>DOI 10.1109/GSMM.2015.7175434</dc:identifier>
        <dc:identifier>http://ria.asturias.es/RIA/handle/123456789/6661</dc:identifier>
        <dc:language>eng</dc:language>
        <dc:relation>Millimeter Waves (GSMM), 2015 Global Symposium On</dc:relation>
        <dc:relation>Sí, esta versión ha sido citada</dc:relation>
        <dc:rights>http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</dc:rights>
        <dc:publisher>IEEE</dc:publisher>
        <dc:source>1;3</dc:source>
        </oai_dc:dc>
      </d:Statement>
    </d:Descriptor>
  3. <d:Component id="123456789_6661_1">
    1. <d:Resource mimeType="application/pdf" ref="http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf" />
    </d:Component>
  </d:Item>
</d:DIDL>

dim

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<dim:dim schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
1. <dim:field element="contributor" mdschema="dc" qualifier="author">Hadarig, Andreea</dim:field>
2. <dim:field element="contributor" mdschema="dc" qualifier="author">Ver Hoeye, Samuel</dim:field>
3. <dim:field element="contributor" mdschema="dc" qualifier="author">Vázquez, Carlos</dim:field>
4. <dim:field element="contributor" mdschema="dc" qualifier="author">Camblor, René</dim:field>
5. <dim:field element="contributor" mdschema="dc" qualifier="author">Fernández, Miguel</dim:field>
6. <dim:field element="contributor" mdschema="dc" qualifier="author">Hotopan, George</dim:field>
7. <dim:field element="contributor" mdschema="dc" qualifier="author">Alonso, Leticia</dim:field>
8. <dim:field element="contributor" mdschema="dc" qualifier="author">Las Heras, Fernando</dim:field>
9. <dim:field element="date" mdschema="dc" qualifier="accessioned">2016-06-16T11:15:32Z</dim:field>
10. <dim:field element="date" mdschema="dc" qualifier="available">2016-06-16T11:15:32Z</dim:field>
11. <dim:field element="date" mdschema="dc" qualifier="issued">2015-05</dim:field>
12. <dim:field element="identifier" mdschema="dc" qualifier="other">DOI 10.1109/GSMM.2015.7175434</dim:field>
13. <dim:field element="identifier" mdschema="dc" qualifier="uri">http://ria.asturias.es/RIA/handle/123456789/6661</dim:field>
14. <dim:field element="description" lang="eng" mdschema="dc" qualifier="abstract">This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</dim:field>
15. <dim:field element="description" lang="eng" mdschema="dc" qualifier="sponsorship">This work has been supported by the European Union Seventh Framework Programme (FP/2007-2013) under grant agreement number 600849, by the "Ministerio de Ciencia e Innovacion" of Spain/FEDER under projects TEC2008-01638/TEC, TEC2011/24492, IPT-2011-0951-390000 and CONSOLIDER-INGENIO CSD2008-00068, grant AP2012-2020, by the Gobierno del Principado de Asturias (PCTI)/FEDER-FSE under projects EQUIP08-06, FC09-COF09-12, EQUIP10-31, GRUPIN14-114, grant BP13034 and by Catedra Telefonica - Universidad de Oviedo.</dim:field>
16. <dim:field element="language" lang="eng" mdschema="dc" qualifier="iso">eng</dim:field>
17. <dim:field element="publisher" lang="eng" mdschema="dc">IEEE</dim:field>
18. <dim:field element="relation" lang="eng" mdschema="dc" qualifier="ispartof">Millimeter Waves (GSMM), 2015 Global Symposium On</dim:field>
19. <dim:field element="relation" lang="eng" mdschema="dc" qualifier="isreferencedby">Sí, esta versión ha sido citada</dim:field>
20. <dim:field element="rights" lang="eng" mdschema="dc">http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</dim:field>
21. <dim:field element="source" mdschema="dc">1;3</dim:field>
22. <dim:field element="subject" lang="eng" mdschema="dc">Graphene subharmonic mixer</dim:field>
23. <dim:field element="subject" lang="eng" mdschema="dc">3d printed</dim:field>
24. <dim:field element="subject" lang="eng" mdschema="dc" qualifier="classification">Publicado</dim:field>
25. <dim:field element="title" lang="eng" mdschema="dc">3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</dim:field>
26. <dim:field element="type" lang="eng" mdschema="dc">article</dim:field>
</dim:dim>

etdms

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<thesis schemaLocation="http://www.ndltd.org/standards/metadata/etdms/1.0/ http://www.ndltd.org/standards/metadata/etdms/1.0/etdms.xsd">
1. <title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</title>
2. <creator>Hadarig, Andreea</creator>
3. <creator>Ver Hoeye, Samuel</creator>
4. <creator>Vázquez, Carlos</creator>
5. <creator>Camblor, René</creator>
6. <creator>Fernández, Miguel</creator>
7. <creator>Hotopan, George</creator>
8. <creator>Alonso, Leticia</creator>
9. <creator>Las Heras, Fernando</creator>
10. <subject>Graphene subharmonic mixer</subject>
11. <subject>3d printed</subject>
12. <description>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</description>
13. <date>2016-06-16</date>
14. <date>2016-06-16</date>
15. <date>2015-05</date>
16. <type>article</type>
17. <identifier>DOI 10.1109/GSMM.2015.7175434</identifier>
18. <identifier>http://ria.asturias.es/RIA/handle/123456789/6661</identifier>
19. <language>eng</language>
20. <relation>Millimeter Waves (GSMM), 2015 Global Symposium On</relation>
21. <relation>Sí, esta versión ha sido citada</relation>
22. <rights>http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</rights>
23. <publisher>IEEE</publisher>
24. <source>1;3</source>
</thesis>

marc

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<record schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd">
1. <leader>00925njm 22002777a 4500</leader>
2. <datafield ind1=" " ind2=" " tag="042">
  1. <subfield code="a">dc</subfield>
  </datafield>
3. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Hadarig, Andreea</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
4. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Ver Hoeye, Samuel</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
5. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Vázquez, Carlos</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
6. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Camblor, René</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
7. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Fernández, Miguel</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
8. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Hotopan, George</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
9. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Alonso, Leticia</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
10. <datafield ind1=" " ind2=" " tag="720">
  1. <subfield code="a">Las Heras, Fernando</subfield>
  2. <subfield code="e">author</subfield>
  </datafield>
11. <datafield ind1=" " ind2=" " tag="260">
  1. <subfield code="c">2015-05</subfield>
  </datafield>
12. <datafield ind1=" " ind2=" " tag="520">
  1. <subfield code="a">This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</subfield>
  </datafield>
13. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">DOI 10.1109/GSMM.2015.7175434</subfield>
  </datafield>
14. <datafield ind1="8" ind2=" " tag="024">
  1. <subfield code="a">http://ria.asturias.es/RIA/handle/123456789/6661</subfield>
  </datafield>
15. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">Graphene subharmonic mixer</subfield>
  </datafield>
16. <datafield ind1=" " ind2=" " tag="653">
  1. <subfield code="a">3d printed</subfield>
  </datafield>
17. <datafield ind1="0" ind2="0" tag="245">
  1. <subfield code="a">3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</subfield>
  </datafield>
</record>

mets

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<mets ID=" DSpace_ITEM_123456789-6661" OBJID=" hdl:123456789/6661" PROFILE="DSpace METS SIP Profile 1.0" TYPE="DSpace ITEM" schemaLocation="http://www.loc.gov/METS/ http://www.loc.gov/standards/mets/mets.xsd">
1. <metsHdr CREATEDATE="2023-01-14T18:16:43Z">
  1. <agent ROLE="CUSTODIAN" TYPE="ORGANIZATION">
    1. <name>RIA</name>
    </agent>
  </metsHdr>
2. <dmdSec ID="DMD_123456789_6661">
  1. <mdWrap MDTYPE="MODS">
    1. <xmlData schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
      1. <mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Hadarig, Andreea</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Ver Hoeye, Samuel</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Vázquez, Carlos</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Camblor, René</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Fernández, Miguel</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Hotopan, George</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Alonso, Leticia</mods:namePart>
        </mods:name>
        <mods:name>
        <mods:role>
        <mods:roleTerm type="text">author</mods:roleTerm>
        </mods:role>
        <mods:namePart>Las Heras, Fernando</mods:namePart>
        </mods:name>
        <mods:extension>
        <mods:dateAccessioned encoding="iso8601">2016-06-16T11:15:32Z</mods:dateAccessioned>
        </mods:extension>
        <mods:extension>
        <mods:dateAvailable encoding="iso8601">2016-06-16T11:15:32Z</mods:dateAvailable>
        </mods:extension>
        <mods:originInfo>
        <mods:dateIssued encoding="iso8601">2015-05</mods:dateIssued>
        </mods:originInfo>
        <mods:identifier type="other">DOI 10.1109/GSMM.2015.7175434</mods:identifier>
        <mods:identifier type="uri">http://ria.asturias.es/RIA/handle/123456789/6661</mods:identifier>
        <mods:abstract>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</mods:abstract>
        <mods:language>
        <mods:languageTerm authority="rfc3066">eng</mods:languageTerm>
        </mods:language>
        <mods:accessCondition type="useAndReproduction">http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</mods:accessCondition>
        <mods:subject>
        <mods:topic>Graphene subharmonic mixer</mods:topic>
        </mods:subject>
        <mods:subject>
        <mods:topic>3d printed</mods:topic>
        </mods:subject>
        <mods:titleInfo>
        <mods:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</mods:title>
        </mods:titleInfo>
        <mods:genre>article</mods:genre>
        </mods:mods>
      </xmlData>
    </mdWrap>
  </dmdSec>
3. <amdSec ID="FO_123456789_6661_1">
  1. <techMD ID="TECH_O_123456789_6661_1">
    1. <mdWrap MDTYPE="PREMIS">
      1. <xmlData schemaLocation="http://www.loc.gov/standards/premis http://www.loc.gov/standards/premis/PREMIS-v1-0.xsd">
        <premis:premis>
        <premis:object>
        <premis:objectIdentifier>
        <premis:objectIdentifierType>URL</premis:objectIdentifierType>
        <premis:objectIdentifierValue>http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf</premis:objectIdentifierValue>
        </premis:objectIdentifier>
        <premis:objectCategory>File</premis:objectCategory>
        <premis:objectCharacteristics>
        <premis:fixity>
        <premis:messageDigestAlgorithm>MD5</premis:messageDigestAlgorithm>
        <premis:messageDigest>3566d3ca9435821b471d6448d66906d0</premis:messageDigest>
        </premis:fixity>
        <premis:size>1507577</premis:size>
        <premis:format>
        <premis:formatDesignation>
        <premis:formatName>application/pdf</premis:formatName>
        </premis:formatDesignation>
        </premis:format>
        </premis:objectCharacteristics>
        <premis:originalName>2015GSMM_Andreea_Hadarig_FinalPaper.pdf</premis:originalName>
        </premis:object>
        </premis:premis>
        </xmlData>
      </mdWrap>
    </techMD>
  </amdSec>
4. <fileSec>
  1. <fileGrp USE="ORIGINAL">
    1. <file ADMID="FO_123456789_6661_1" CHECKSUM="3566d3ca9435821b471d6448d66906d0" CHECKSUMTYPE="MD5" GROUPID="GROUP_BITSTREAM_123456789_6661_1" ID="BITSTREAM_ORIGINAL_123456789_6661_1" MIMETYPE="application/pdf" SEQ="1" SIZE="1507577">
      1. <FLocat LOCTYPE="URL" href="http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf" type="simple" />
      </file>
    </fileGrp>
  </fileSec>
5. <structMap LABEL="DSpace Object" TYPE="LOGICAL">
  1. <div ADMID="DMD_123456789_6661" TYPE="DSpace Object Contents">
    1. <div TYPE="DSpace BITSTREAM">
      1. <fptr FILEID="BITSTREAM_ORIGINAL_123456789_6661_1" />
      </div>
    </div>
  </structMap>
</mets>

mods

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<mods:mods schemaLocation="http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-1.xsd">
1. <mods:name>
  1. <mods:namePart>Hadarig, Andreea</mods:namePart>
  </mods:name>
2. <mods:name>
  1. <mods:namePart>Ver Hoeye, Samuel</mods:namePart>
  </mods:name>
3. <mods:name>
  1. <mods:namePart>Vázquez, Carlos</mods:namePart>
  </mods:name>
4. <mods:name>
  1. <mods:namePart>Camblor, René</mods:namePart>
  </mods:name>
5. <mods:name>
  1. <mods:namePart>Fernández, Miguel</mods:namePart>
  </mods:name>
6. <mods:name>
  1. <mods:namePart>Hotopan, George</mods:namePart>
  </mods:name>
7. <mods:name>
  1. <mods:namePart>Alonso, Leticia</mods:namePart>
  </mods:name>
8. <mods:name>
  1. <mods:namePart>Las Heras, Fernando</mods:namePart>
  </mods:name>
9. <mods:extension>
  1. <mods:dateAvailable encoding="iso8601">2016-06-16T11:15:32Z</mods:dateAvailable>
  </mods:extension>
10. <mods:extension>
  1. <mods:dateAccessioned encoding="iso8601">2016-06-16T11:15:32Z</mods:dateAccessioned>
  </mods:extension>
11. <mods:originInfo>
  1. <mods:dateIssued encoding="iso8601">2015-05</mods:dateIssued>
  </mods:originInfo>
12. <mods:identifier type="other">DOI 10.1109/GSMM.2015.7175434</mods:identifier>
13. <mods:identifier type="uri">http://ria.asturias.es/RIA/handle/123456789/6661</mods:identifier>
14. <mods:abstract>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</mods:abstract>
15. <mods:language>
  1. <mods:languageTerm>eng</mods:languageTerm>
  </mods:language>
16. <mods:accessCondition type="useAndReproduction">http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</mods:accessCondition>
17. <mods:subject>
  1. <mods:topic>Graphene subharmonic mixer</mods:topic>
  </mods:subject>
18. <mods:subject>
  1. <mods:topic>3d printed</mods:topic>
  </mods:subject>
19. <mods:titleInfo>
  1. <mods:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</mods:title>
  </mods:titleInfo>
20. <mods:genre>article</mods:genre>
</mods:mods>

ore

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<atom:entry schemaLocation="http://www.w3.org/2005/Atom http://www.kbcafe.com/rss/atom.xsd.xml">
1. <atom:id>http://ria.asturias.es/RIA/handle/123456789/6661/ore.xml</atom:id>
2. <atom:link href="http://ria.asturias.es/RIA/handle/123456789/6661" rel="alternate" />
3. <atom:link href="http://ria.asturias.es/RIA/handle/123456789/6661/ore.xml" rel="http://www.openarchives.org/ore/terms/describes" />
4. <atom:link href="http://ria.asturias.es/RIA/handle/123456789/6661/ore.xml#atom" rel="self" type="application/atom+xml" />
5. <atom:published>2016-06-16T11:15:32Z</atom:published>
6. <atom:updated>2016-06-16T11:15:32Z</atom:updated>
7. <atom:source>
  1. <atom:generator>RIA</atom:generator>
  </atom:source>
8. <atom:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</atom:title>
9. <atom:author>
  1. <atom:name>Hadarig, Andreea</atom:name>
  </atom:author>
10. <atom:author>
  1. <atom:name>Ver Hoeye, Samuel</atom:name>
  </atom:author>
11. <atom:author>
  1. <atom:name>Vázquez, Carlos</atom:name>
  </atom:author>
12. <atom:author>
  1. <atom:name>Camblor, René</atom:name>
  </atom:author>
13. <atom:author>
  1. <atom:name>Fernández, Miguel</atom:name>
  </atom:author>
14. <atom:author>
  1. <atom:name>Hotopan, George</atom:name>
  </atom:author>
15. <atom:author>
  1. <atom:name>Alonso, Leticia</atom:name>
  </atom:author>
16. <atom:author>
  1. <atom:name>Las Heras, Fernando</atom:name>
  </atom:author>
17. <atom:category label="Aggregation" scheme="http://www.openarchives.org/ore/terms/" term="http://www.openarchives.org/ore/terms/Aggregation" />
18. <atom:category scheme="http://www.openarchives.org/ore/atom/modified" term="2016-06-16T11:15:32Z" />
19. <atom:category label="DSpace Item" scheme="http://www.dspace.org/objectModel/" term="DSpaceItem" />
20. <atom:link href="http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf" length="1507577" rel="http://www.openarchives.org/ore/terms/aggregates" title="2015GSMM_Andreea_Hadarig_FinalPaper.pdf" type="application/pdf" />
21. <oreatom:triples>
  1. <rdf:Description about="http://ria.asturias.es/RIA/handle/123456789/6661/ore.xml#atom">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceItem" />
    2. <dcterms:modified>2016-06-16T11:15:32Z</dcterms:modified>
    </rdf:Description>
  2. <rdf:Description about="http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf">
    1. <rdf:type resource="http://www.dspace.org/objectModel/DSpaceBitstream" />
    2. <dcterms:description>ORIGINAL</dcterms:description>
    </rdf:Description>
  </oreatom:triples>
</atom:entry>

qdc

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<qdc:qualifieddc schemaLocation="http://purl.org/dc/elements/1.1/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dc.xsd http://purl.org/dc/terms/ http://dublincore.org/schemas/xmls/qdc/2006/01/06/dcterms.xsd http://dspace.org/qualifieddc/ http://www.ukoln.ac.uk/metadata/dcmi/xmlschema/qualifieddc.xsd">
1. <dc:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</dc:title>
2. <dc:creator>Hadarig, Andreea</dc:creator>
3. <dc:creator>Ver Hoeye, Samuel</dc:creator>
4. <dc:creator>Vázquez, Carlos</dc:creator>
5. <dc:creator>Camblor, René</dc:creator>
6. <dc:creator>Fernández, Miguel</dc:creator>
7. <dc:creator>Hotopan, George</dc:creator>
8. <dc:creator>Alonso, Leticia</dc:creator>
9. <dc:creator>Las Heras, Fernando</dc:creator>
10. <dc:subject>Graphene subharmonic mixer</dc:subject>
11. <dc:subject>3d printed</dc:subject>
12. <dcterms:abstract>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</dcterms:abstract>
13. <dcterms:dateAccepted>2016-06-16T11:15:32Z</dcterms:dateAccepted>
14. <dcterms:available>2016-06-16T11:15:32Z</dcterms:available>
15. <dcterms:created>2016-06-16T11:15:32Z</dcterms:created>
16. <dcterms:issued>2015-05</dcterms:issued>
17. <dc:type>article</dc:type>
18. <dc:identifier>DOI 10.1109/GSMM.2015.7175434</dc:identifier>
19. <dc:identifier>http://ria.asturias.es/RIA/handle/123456789/6661</dc:identifier>
20. <dc:language>eng</dc:language>
21. <dc:relation>Millimeter Waves (GSMM), 2015 Global Symposium On</dc:relation>
22. <dc:relation>Sí, esta versión ha sido citada</dc:relation>
23. <dc:rights>http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</dc:rights>
24. <dc:publisher>IEEE</dc:publisher>
25. <dc:source>1;3</dc:source>
</qdc:qualifieddc>

rdf

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<rdf:RDF schemaLocation="http://www.openarchives.org/OAI/2.0/rdf/ http://www.openarchives.org/OAI/2.0/rdf.xsd">
1. <ow:Publication about="oai:http://172.28.36.237/:123456789/6661">
  1. <dc:title>3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</dc:title>
  2. <dc:creator>Hadarig, Andreea</dc:creator>
  3. <dc:creator>Ver Hoeye, Samuel</dc:creator>
  4. <dc:creator>Vázquez, Carlos</dc:creator>
  5. <dc:creator>Camblor, René</dc:creator>
  6. <dc:creator>Fernández, Miguel</dc:creator>
  7. <dc:creator>Hotopan, George</dc:creator>
  8. <dc:creator>Alonso, Leticia</dc:creator>
  9. <dc:creator>Las Heras, Fernando</dc:creator>
  10. <dc:subject>Graphene subharmonic mixer</dc:subject>
  11. <dc:subject>3d printed</dc:subject>
  12. <dc:description>This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</dc:description>
  13. <dc:date>2016-06-16T11:15:32Z</dc:date>
  14. <dc:date>2016-06-16T11:15:32Z</dc:date>
  15. <dc:date>2015-05</dc:date>
  16. <dc:type>article</dc:type>
  17. <dc:identifier>DOI 10.1109/GSMM.2015.7175434</dc:identifier>
  18. <dc:identifier>http://ria.asturias.es/RIA/handle/123456789/6661</dc:identifier>
  19. <dc:language>eng</dc:language>
  20. <dc:relation>Millimeter Waves (GSMM), 2015 Global Symposium On</dc:relation>
  21. <dc:relation>Sí, esta versión ha sido citada</dc:relation>
  22. <dc:rights>http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</dc:rights>
  23. <dc:publisher>IEEE</dc:publisher>
  24. <dc:source>1;3</dc:source>
  </ow:Publication>
</rdf:RDF>

xoai

Download XML

<?xml version="1.0" encoding="UTF-8" ?>

<metadata schemaLocation="http://www.lyncode.com/xoai http://www.lyncode.com/xsd/xoai.xsd">
1. <element name="dc">
  1. <element name="contributor">
    1. <element name="author">
      1. <element name="none">
        <field name="value">Hadarig, Andreea</field>
        <field name="value">Ver Hoeye, Samuel</field>
        <field name="value">Vázquez, Carlos</field>
        <field name="value">Camblor, René</field>
        <field name="value">Fernández, Miguel</field>
        <field name="value">Hotopan, George</field>
        <field name="value">Alonso, Leticia</field>
        <field name="value">Las Heras, Fernando</field>
        </element>
      </element>
    </element>
  2. <element name="date">
    1. <element name="accessioned">
      1. <element name="none">
        <field name="value">2016-06-16T11:15:32Z</field>
        </element>
      </element>
    2. <element name="available">
      1. <element name="none">
        <field name="value">2016-06-16T11:15:32Z</field>
        </element>
      </element>
    3. <element name="issued">
      1. <element name="none">
        <field name="value">2015-05</field>
        </element>
      </element>
    </element>
  3. <element name="identifier">
    1. <element name="other">
      1. <element name="none">
        <field name="value">DOI 10.1109/GSMM.2015.7175434</field>
        </element>
      </element>
    2. <element name="uri">
      1. <element name="none">
        <field name="value">http://ria.asturias.es/RIA/handle/123456789/6661</field>
        </element>
      </element>
    </element>
  4. <element name="description">
    1. <element name="abstract">
      1. <element name="eng">
        <field name="value">This work presents a millimeter/submillimeter wave frequency receiver integrating a graphene subharmonic mixer and a diagonal horn antenna. The device receives the RF signal through the diagonal horn antenna directly connected to the WR-3 input of the mixer. The desired frequency mixing performance is obtained using the non-linear behavior of a few-layer graphene film placed on a microstrip line gap. Using the internally generated 6th, 8th and 10th harmonic components of the input signal provided by the WR-28 standard waveguide in the 26-40 GHz the downconversion operation of the RF signal to a 300 MHz intermediate frequency is performed. A prototype of the receiver has been manufactured using high precision 3D printing technology. The performance of this device is characterized taking into account the behavior of the IF power in the 220-330 GHz band. Measured radiation patterns are also included.</field>
        </element>
      </element>
    2. <element name="sponsorship">
      1. <element name="eng">
        <field name="value">This work has been supported by the European Union Seventh Framework Programme (FP/2007-2013) under grant agreement number 600849, by the "Ministerio de Ciencia e Innovacion" of Spain/FEDER under projects TEC2008-01638/TEC, TEC2011/24492, IPT-2011-0951-390000 and CONSOLIDER-INGENIO CSD2008-00068, grant AP2012-2020, by the Gobierno del Principado de Asturias (PCTI)/FEDER-FSE under projects EQUIP08-06, FC09-COF09-12, EQUIP10-31, GRUPIN14-114, grant BP13034 and by Catedra Telefonica - Universidad de Oviedo.</field>
        </element>
      </element>
    </element>
  5. <element name="language">
    1. <element name="iso">
      1. <element name="eng">
        <field name="value">eng</field>
        </element>
      </element>
    </element>
  6. <element name="publisher">
    1. <element name="eng">
      1. <field name="value">IEEE</field>
      </element>
    </element>
  7. <element name="relation">
    1. <element name="ispartof">
      1. <element name="eng">
        <field name="value">Millimeter Waves (GSMM), 2015 Global Symposium On</field>
        </element>
      </element>
    2. <element name="isreferencedby">
      1. <element name="eng">
        <field name="value">Sí, esta versión ha sido citada</field>
        </element>
      </element>
    </element>
  8. <element name="rights">
    1. <element name="eng">
      1. <field name="value">http://creativecommons.org/licenses/by-nc-nd/3.0/deed.es</field>
      </element>
    </element>
  9. <element name="source">
    1. <element name="none">
      1. <field name="value">1;3</field>
      </element>
    </element>
  10. <element name="subject">
    1. <element name="eng">
      1. <field name="value">Graphene subharmonic mixer</field>
      2. <field name="value">3d printed</field>
      </element>
    2. <element name="classification">
      1. <element name="eng">
        <field name="value">Publicado</field>
        </element>
      </element>
    </element>
  11. <element name="title">
    1. <element name="eng">
      1. <field name="value">3D printed millimeter wave receiver integrating a graphene subharmonic mixer and a diagonal horn antenna</field>
      </element>
    </element>
  12. <element name="type">
    1. <element name="eng">
      1. <field name="value">article</field>
      </element>
    </element>
  </element>
2. <element name="bundles">
  1. <element name="bundle">
    1. <field name="name">ORIGINAL</field>
    2. <element name="bitstreams">
      1. <element name="bitstream">
        <field name="name">2015GSMM_Andreea_Hadarig_FinalPaper.pdf</field>
        <field name="originalName">2015GSMM_Andreea_Hadarig_FinalPaper.pdf</field>
        <field name="format">application/pdf</field>
        <field name="size">1507577</field>
        <field name="url">http://172.28.36.237:8080/jspui/bitstream/123456789/6661/1/2015GSMM_Andreea_Hadarig_FinalPaper.pdf</field>
        <field name="checksum">3566d3ca9435821b471d6448d66906d0</field>
        <field name="checksumAlgorithm">MD5</field>
        <field name="sid">1</field>
        </element>
      </element>
    </element>
  </element>
3. <element name="others">
  1. <field name="handle">123456789/6661</field>
  2. <field name="identifier">oai:http://172.28.36.237/:123456789/6661</field>
  3. <field name="lastModifyDate">2016-06-16 13:15:33.366</field>
  </element>
4. <element name="repository">
  1. <field name="name">RIA</field>
  2. <field name="mail">gemma.gonzalez@ricoh.es</field>
  </element>
</metadata>